GPS регистратор вождения для мотоциклов серии EDR α [Drrorecorde

Referred to the above said subject. This product has installed today to my XSR900. Although this product was shipped from Japan, the instruction manual obviously written in Japanese but it did not cause any problem to read since i could use google translate to read thru.The Mitsuba App cannot be downloaded from play store (android) as it does not support out of Japan country. However, i managed to download the APK thru other source, and it works perfectly.Overall, it took me about 3 hours to finish the installation and setup. What i spent most was to figure out how to mount the front camera as the product set did not provide the bracket fitting kit (sold separately). Many people will fit it at the front fork suspension but for me, i fitted it under the front cowl with some cable ties instead.I would suggest to get some IPA and primer to clean the surface where you need to mount the switch, camera, gps sensor prior applying the double sided tape in order to have better adhesive contact to prevent peeling off these components.

[How is it used? It is only for use in Touring.

Was the one you received as per Image? Yes.

How was your experience with it? I used to be forced to use a product for car use, but I think Motorcycle should use Motorcycle-specific products.

[Points to note] There is no Monitor screen on the Body and all checks are done on the phone.

How did it compare to other products? The price is higher than other Chinese products, but we understand that it is because it is a JAPAN product.

Other items that would be helpful
Point or hang of installation/Items to be purchased together/ Opinions and requests to the Manufacturer You need to download the app to your phone.

Recently I have been feeling the need for a driver's license recorder due to various problems. I decided to purchase one for my own protection. The installation itself is easy and the instruction manual is very helpful. The app for smartphone is also very easy to set up. The images are clear and I think I made a good purchase. (^O^)

[Usage]
I installed this as a precaution against the possibility of Troubles.
It's usually fun to look back on my runs in Touring and Winding.

[What you received is as per Image.
It was as described in the product description.
The body was surprisingly small, which was a big help. (SC80) The Limit will fit under the Rear Sets of

[Try it.
In the event of an emergency, even the number of the relative vehicle is well resolved.
I will be careful not to use the video in Trouble.
Playback is available in Front, Rear, Map, and 3-Direction G in Downloaded PlayerSoft.
Since it is equipped with GPS, you can look back on your touring with a map and a video, which is very interesting.
Setting up Body is easy to do with your smartphone.
You can also check the video on your phone, but it's just to see if the recording is saved or not.

(Points to note)
If the FrontCamera is mounted directly below the Light, the Front maintenance stand may become unusable.
After turning Ignition on, make sure the Indicator on the Switch is lit blue (recording).
I don't know why, but the MicroSDCard works with SanDisk's UltaraSeries, but it can't communicate with the phone.
Tracksend products work fine up to 256GB.
When inserting and removing the MicroSD card from the body, be careful not to let the card fly away because of the strong spring of the slot.

Compare with other products
The resolution is higher than the Camera-integrated driving recorder I used to use.
It has a full range of playback soft functions.
The recording time for each file is only 30 seconds, so extracting the video is cumbersome. 5 minutes would be fine.


If you are not confident about keeping your wiring SMART, it is better to leave it to the Shop.

I'm scared of the public road environment, which seems to be getting worse every year, and I'm introducing it along with Return after 9 years.
The Baron Red, TDK, and Aioi co-developed Drarecorder seemed to be convenient, and it was lost, but since the wage is high, it is here.

I purchased the following for installation
OEM ActionCamMount Compatible Adapter
Base mount for REC Mount REC-B28 (M6) Bolt
Emon Terminal set
NITOMS Acetate Cloth Adhesive Tape

The FrontCamera had a screw hole in the UnderBlanket at first, so I put it there.
I reconsidered and moved it to the front cowl stay because it had a wide angle of 162 degrees and the Cowl was cutting the angle of view.
Because there was not the place where RearCamera could be installed elsewhere, it pasted it on the Fender upper part.
It's right under the tail lamp, so I checked the video at night and it didn't affect it.
The position adjustment is also marked on CameraRear, so if you can see it, I think it's pretty easy!
I checked it with my phone, and it works just fine.

GPS is attached to Cowl Bracket and Switch is attached to Top Bridge.

The power supply is direct battery connection and ACC power supply.
The latter is also wired from the Tail lamp due to its installation location.
SS900 (01) The yellow line in the service manual is the power supply.
While confirming the power supply, I interrupt it with Emon's WiringConnector!
By the way, this Connector is only crushed by Pliers, so you don't need a special tool and it is convenient!

Body is attached to the side of Seat frame
Wiring is Refreshing between Fender panel and Frame.

Space under the Seat is easy and large, which is not suitable for a Sports Motorcycle.
You can also remove Seat from Battery and just raise Tank.
I'm not going to pay 30,000 over labor for such an easy job...


As for the feeling of use, the image quality is good both in daytime and nighttime.
I was a little concerned about White jumping on sunny days, but I feel like it's a waste of time to use it just for the drive recorder!
However, it is delicate to open the hard waterproof lid every time and take out the SDCard that doesn't come out and use it.

No problem with shaking due to vibration as long as it's attached to a proper place.