- Last time with the same product, less than 2mm remained after 20,000 km. (I'm sure there are individual differences in the way one rides.)There is no gusty Image, and while smooth, the braking is done...Прочитайте больше
- I am using it with KawasakiZ1.We are on Double disk with OEMCaliper.Is it thanks to the Shim on the back of the Pad?No squeaking so far.Braking force, but it does not perform Race.It works well enough...Прочитайте больше
- I replaced the Front Brake Pads on my Z1R with Vesra's. The pads no longer squeal and I can break without worry. I don't know about the durability yet.Прочитайте больше
- Using it as it is, it is like that to begin with, but even the double disk on the 650RS W3 only works vaguely.Especially with Solid's Rotor without Slit, it is the worst in the rain, it doesn't work a...Прочитайте больше
- I decided to go with Resin because of the Record board pattern on the Metal pad, it is thicker and the braking force is ?approximately right.To make the most of the braking power, we polished the Brak...Прочитайте больше
- I had bought Besra because it didn't squeak Brake.The exchange would normally have taken 30 minutes to complete.The Pad I purchased this time holds the Brake lever.Glitch that does not return at all.I...Прочитайте больше
- I replaced it and it has not even driven 2000km, but when I looked at the pad today, there was a Crack on the side and when I removed it, about 1/3 of it came off….I have been riding Motorcycle for ov...Прочитайте больше
- Used on front brake of KZ1000 MKII.Works much better than OEMPad. It works better than I expected!Прочитайте больше
- Rear Brake Pads for BWS125 were replaced.It was very well worn and after the replacement it was very good.The brake fluid had not been replaced after delivery, so the front and rear were replaced as w...Прочитайте больше
- [How is it used?YZF-R15 (MODEL in 2012) for Rear.When I looked at Brake Pads, there was none left, so I hurriedly ordered some from Webike.It was an order item that was not in stock, but it arrived in...Прочитайте больше
- Motorcycle is YAMAHA's MT-01.It has only been installed for a short time, so I can't speak to its durability, but it is a replacement for the DaytonaRed Pad.Since it is a Rfor Brake to begin with, I w...Прочитайте больше
- About quality and textureТормозные колодки отличного качества, сделаны в Японии по высоким стандартам, видны вкрапления металла, а также твердый состав колодкиAbout the feeling of useПосле пробега в 6...Прочитайте больше
- It is an SR400Final edition and has a lot of OEMPad Dust, which is decreasing fast, so I was torn between DAYTONA's Golden Kai and Vesra, but I decided to go with Vesra, which looks more OEM.I don't k...Прочитайте больше
- Resin was chosen for its aggressiveness to DISC.It stops firmly, so the braking ability is not a problem, but I felt it was losing power quite quickly.However, unlike the Metal pad, I think it's less ...Прочитайте больше
- I suddenly see FCaliper.Brake Pads in F is almost over (LOL)So, I replaced the Pad.Vesla's Sintered, which was also put into the NINJA2 Helmet 50R.Basically, I don't use Brake very much (laughs).We do...Прочитайте больше
- The point that became better than OEM is that the thickness is thicker than OEM, so it is expected to improve the life, and the beginning of the effect after gripping Lever is quicker.OthersThe stoppi...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА