- This is Shaft, a cantilevered Roller stand.Without it, nothing is possible.If it is a compatible caliber, it will go in easily.I used it for about 4 years and it was not damaged, just rusted.Rust used...Прочитайте больше
- Although it is originally Φ 41 for panigale,In my case, with Rear slider attachedBecause I wanted to use Maintenace Stand,I chose Φ 26.(Only Babyface's Slider corresponds to this)Follow the instru...Прочитайте больше
- Since it was indispensable to the cantilever STAND, to it, it purchased together with the STAND.at the time of use, although there is, since there is no shake of a car body so that a fall becomes anx...Прочитайте больше
- It seems that it is satisfactory although it was shorter than anticipation and worried.
It may be hard to set to a Motorcycle if it lengthens.
Прочитайте больше - Simultaneous purchase was carried out with the Maintenance stands of the company.
It seems that it can respond also to the Arm of other company if Shafts are exchanged although it is used for present...Прочитайте больше - Although a cantilever Stand shaft is inserted into an Axle Shaft, I feel that it is short at worst.
It will be chilled, if a Shaft falls out when raising ? car body, if it could be long to a slight d...Прочитайте больше - It purchases to MONSTER1100S. (required for JT-136RD use) It is just fit and safe!Прочитайте больше
- In using cantilever stand JT-136, they are indispensable parts. Although collected into the column corresponding to a vehicle type with the grade, I correspond also to Monster S4R.Прочитайте больше
- Perfect to S2R1000! With [ it plays and ] none of most wobbles!Прочитайте больше
- It purchased to Ducati 1098. It purchased simultaneously with a stand main part. I think that attachment was also easy and did not take 1 minute. However, it is a difficulty that a shaft is still a la...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА