- I asked Shop to do the installation.If I can remove the top cap, I may be able to do the work myself. Since I will be using it in a mini circuit, I would like to change the oil viscosity depending on ...Прочитайте больше
- The attached Fork Spring is softer than NORMAL and the Oil is harder.The PD Valve is a Scooter-like Valve, but it is good for the stickiness of the Fork.Because in the hanging state, the Valve is jost...Прочитайте больше
- There are no performance problems with the product.I'm glad I bought itHowever, there was a slight lick mark on one side of the Initial Adjuster from turning it with a hex.Obviously, it is used.Was it...Прочитайте больше
- I used it on a CBR650F...Before Impression...although the stock information stated that I would receive it in a short period of time, when I placed the order, the delivery time was extended to several...Прочитайте больше
- It is supposed to be for GSX-R150, but I bought it for GSX-R125 because the distributor's website said it was for both 150 and 125. As a result, I was able to install it without any problem.I also pur...Прочитайте больше
- As I mentioned in my diary, the installation is done at the same time as the Fork Overhaul, which requires special tools and skills, and takes a lot of gold and time if you do it yourself.But it works...Прочитайте больше
- Ninja250SL/The OEMFork of the Z250SL is not the most comfortable to ride on the street, as it is soft and has a thrust to it that comes back to you during cornering. Still, the light weight of the veh...Прочитайте больше
- I was interested in the PD Valve because the OEMFork of the Z250SL is too soft and it comes back undulating during cornering, but I was hesitant because orifice machining and cutting of the color seem...Прочитайте больше
- The shape of the Initial Adjuster is completely different from the picture, and there is no Level for adjustment, so it was difficult to adjust.In the photo, there is a Level line with Plus screw. In ...Прочитайте больше
- Purchased for GSX-R125Circuit Running.The rear suspension was too stiff and didn't stoke at all, so I replaced it with a YSS kit.Although I haven't run it yet, I can see the change just from the feeli...Прочитайте больше
- I installed it on SR400.The F suspension of SR400 sinks down at once when FBrake is applied strongly.Control was low and there was a fear that the bottom might fall out.I thought about changing the oi...Прочитайте больше
- It's a bit expensive for CUB Parts, but I installed it on my JA44.With the disc brake, it has been converted to FFork of WAVE, but the end cap is the structure which is held with C-ring, and the inner...Прочитайте больше
- Basically, I agree with kamayan27, and I'll limit myself to talking about it in Race use.Brake initial behavior is good, which cannot be handled by changing oil viscosity or oil level.The lack of spri...Прочитайте больше
- The ride quality is much better than the ride without damping force of NORMAL, it's a big difference!Installation is done in the Instruction Manual (mine is the English version) and The content was di...Прочитайте больше
- Installed on REBEL250Before the exchange, it was bouncing and undulating at Corner, and Front at the last second to stop at the light I'm going to pull it out or something, and while I don't feel any ...Прочитайте больше
- PCXFront fork still has no goods at allSo I installed it as a new product from YSS, although it's only for SpringTo be honest, I think the recoil is still a nice touch, but I have no idea what it look...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА