The change of the rear suspension caused dissatisfaction with the front suspension.I started to feel it especially on bumps and passes.I was wondering what to do with it, but then I discovered that it...Прочитайте больше- The C125OEMFront fork was comfortable for daily use, but it bottomed out on bumps and other bumps in sports driving, so I installed the Upgrade Kit.The Pre-road adjustment allows for a wider range of ...Прочитайте больше
- We purchased the ADV160 after confirming that it was also eligible for installation in its home country.Fork oil No. 15 is included in the package, but we purchased a bet of No. 7.5 because we confirm...Прочитайте больше
- [How is it used?GSX-S 125 2023 (DL32D), Rear is also converted to YSS at the same time.The use of the vehicle is Light, including commuting, city driving, and day-touring.Was the one you received as p...Прочитайте больше
- I asked Shop to do the installation.If I can remove the top cap, I may be able to do the work myself. Since I will be using it in a mini circuit, I would like to change the oil viscosity depending on ...Прочитайте больше
- The attached Fork Spring is softer than NORMAL and the Oil is harder.The PD Valve is a Scooter-like Valve, but it is good for the stickiness of the Fork.Because in the hanging state, the Valve is jost...Прочитайте больше
- There are no performance problems with the product.I'm glad I bought itHowever, there was a slight lick mark on one side of the Initial Adjuster from turning it with a hex.Obviously, it is used.Was it...Прочитайте больше
- I used it on a CBR650F...Before Impression...although the stock information stated that I would receive it in a short period of time, when I placed the order, the delivery time was extended to several...Прочитайте больше
- It is supposed to be for GSX-R150, but I bought it for GSX-R125 because the distributor's website said it was for both 150 and 125. As a result, I was able to install it without any problem.I also pur...Прочитайте больше
- As I mentioned in my diary, the installation is done at the same time as the Fork Overhaul, which requires special tools and skills, and takes a lot of gold and time if you do it yourself.But it works...Прочитайте больше
- Ninja250SL/The OEMFork of the Z250SL is not the most comfortable to ride on the street, as it is soft and has a thrust to it that comes back to you during cornering. Still, the light weight of the veh...Прочитайте больше
- I was interested in the PD Valve because the OEMFork of the Z250SL is too soft and it comes back undulating during cornering, but I was hesitant because orifice machining and cutting of the color seem...Прочитайте больше
- The shape of the Initial Adjuster is completely different from the picture, and there is no Level for adjustment, so it was difficult to adjust.In the photo, there is a Level line with Plus screw. In ...Прочитайте больше
- Purchased for GSX-R125Circuit Running.The rear suspension was too stiff and didn't stoke at all, so I replaced it with a YSS kit.Although I haven't run it yet, I can see the change just from the feeli...Прочитайте больше
- I installed it on SR400.The F suspension of SR400 sinks down at once when FBrake is applied strongly.Control was low and there was a fear that the bottom might fall out.I thought about changing the oi...Прочитайте больше
- It's a bit expensive for CUB Parts, but I installed it on my JA44.With the disc brake, it has been converted to FFork of WAVE, but the end cap is the structure which is held with C-ring, and the inner...Прочитайте больше
? 
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА