I installed it on a CRF250RALLY (2017)External Exhaust System, External Exhaust pipe, Injection The controller is also attached to the motorcycle Even with the Injection controller, I had a feeling th...Прочитайте больше- Installation is not possible without Electric Works Pliers, which are compatible with bare crimped terminals You will need to have In advance, you need to check the Instruction Manual on the product p...Прочитайте больше
- I put it on in the hope that it would improve the starting performance, but I didn't notice any improvement in the starting performance It wasHowever, the low-speed torque has been increased and Idlin...Прочитайте больше
- Nobody says anything good ever happened to me with these onTotally Meaningless Items You don't know you're being cheated onПрочитайте больше
- I installed it in Z900RS CafeThis is a stable Plasma boosterAfter the installation, the rotation of the Engine becomes Smooth, a flat feeling comes out and it rides very well It will be cheaperThe sme...Прочитайте больше
- The low speed Torque surely becomes thick and it became easier when driving at low speed.I will check the impact on the Plug when I run 10000 km.Прочитайте больше
- Peak power area can be increased with external exhaust system etc, but low ? In implementing the ignition system Tuning in order to augment in the middle rotation region, I thought that the product wh...Прочитайте больше
- I could not say anything because it was the plug of Risk introduced at the same time.Idling is like MultiSpark, it becomes a finely continuous sound, and the low speed range is easy to handle.Before t...Прочитайте больше
- 2 We had an opportunity to talk with the Manufacturer directly at the Events booth of the Rinka, we bought it after listening to various explanations. I thought that our GSX - R 750 is Direct Ignition...Прочитайте больше
- Idling's expiration has improved. I felt like running Torque had gone up again. Even though I made Downshift a little rough, my running in the city became a little easier. As for installing, since...Прочитайте больше
- When installing, it is troublesome to have to remove Tank. But when you start the engine, the exhaust sound is obviously different, the slope at 125 cc has something tough, but I had a hard time to go...Прочитайте больше
- I installed it in PCX 150 KF 18.Mounting is easy. Just chew on Ignition coil. The Instruction Manual was also easy to understand. I just do not want to hurt Wiring, so I connected it in parallel using...Прочитайте больше
- I had experiences attached to the CB 750 and NC 700X so far and I knew about the effect, so I did not hesitate to purchase.Although there is no indication of CROSSCUB in the conformity column of Manuf...Прочитайте больше
- Regarding the installation, since the instruction is polite because it is polite, wiring was amateur I was easy. Body's Wiring is pretty long, but I was able to do free Wiring's handling. Wiri...Прочитайте больше
- I feel I became powerful even in the high speed rangeEven if it was pushed in by the Quick connector, the insulating Vinyl part of Wiring did not dig into easily. I grasped it with Pliers without diff...Прочитайте больше
- I connected it just under the vehicle ECU so I could install it without removing Cowl.The included One-touch connector was prone to contact failure, so it was attached without using Solder.There is no...Прочитайте больше
? 
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА