- The front sprocket does not loosen unless the Impact wrench is turned at the maximum Large Power to install it. From the next time, it can be turned manually.Also, if you do not take the Bracket on th...Прочитайте больше
- I purchased this for setting up a Circuit run.Since the OEM's hinge is 17T, the Rear Sprocket also needs to be changed to a Large size.Прочитайте больше
- Buy 520Chainfor Conversion on cb400sfLighter than OEM but felt a little heavierMeatless would have been better.Прочитайте больше
- CB1100, used in 11 yearsWhen we changed the standard 18 to 19, we were told that the Chain hit the Case, so we had it shaved to accommodate.Please note that this was a compatible car model, so if you ...Прочитайте больше
- This is a simultaneous replacement of the front and rear Sprocket and Chain.I think most people replace these three items at the same time, so please refer to this page.Since it is a FrontSprocket, th...Прочитайте больше
- My impression after installation is that there is little difference in fuel consumption, acceleration/deceleration, etc. in town.I haven't gone on any long-distance Touring trips yet.I am looking forw...Прочитайте больше
- Same number as OEM, so no driving experience.Better texture than OEMCospa is goodThis is my first MADE IN SUNSTAR product, so I expect it to be durable!Прочитайте больше
- When I fit 18 Sprockets, the Chain doesn't fit because the Cover has too much Limit.Because I made the rear tire thicker, I thought the offset should be larger, so I decided to use it.I didn't get a c...Прочитайте больше
- I am looking for Front Sprocket 16T for Honda400X. Thanks in advance for your help.I'm sorry that this is not the purpose at all ... I would appreciate it if you could help me.Прочитайте больше
- I wanted to run a little lower in the rpm when flushing at 50-60 km, so I made the change.The Driven is still at 34T, so you can feel a slight acceleration and a drop in top speed 。 It feels like it c...Прочитайте больше
- It is used in ninja250. Because the number is the same, I feel that it is not so different, but I chose it because many people around me are SUNSTAR users.Прочитайте больше
- I purchased for KLX250 which is used widely from the usual commuting to touring and circuit driving.I think the Size was the same as the OEM, etc. (Confirmation required)The installation and tooth acc...Прочитайте больше
- Purchase for CBR 250 RR MC 51.There is no lightweight hole like the reference image.Weight is slightly lighter than OEM, but that is because it's no soundproof Rubber arriving at OEMSprocket.Прочитайте больше
- Mounting on GSX 250R.Cruise on highway became comfortable.Acceleration performance is somewhat lower, but it will also be pulled at low GEARno problem.Прочитайте больше
- Recommended if you do not put out 100 kmEven if you use it for 80 kilometers for people it is Front 13 Rear OEMAcceleration is totally differentYou should change Chain tooOEM extends quicklyOf course,...Прочитайте больше
- Especially in the low speed range acceleration does not become dull but feeling goodIt is very good up to 100 km / h. How about it?Feeling that the Range of GEAR has spread. You can stay at 2nd speed ...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА