- I am purchasing this because I need it to replace the Slip-on Silencer.The quality is fine and it prevents exhaust leaks well, but it is a consumable item and I would like it to be a little less expen...Прочитайте больше
- [How is it used?I used it to replace the YOSHIMURAExhaust System on my WR155.How was your experience with it?It is usable without leaks of exhaust Gas.How did it compare to other products?I have never...Прочитайте больше
- Used to replace the Exhaust System on a 2001 D Tracker with an external Slip-on Silencer.OEM Parts No. 11061-1055For late D Tracker and KLX.The size of the Gasket is different from the previous year's...Прочитайте больше
- I bought a used SKYWAVE (CJ45A) at a flea market in August 2023, and I felt that the sound was too loud for an OEM exhaust system. I was surprised that the sound became quieter after replacing the exh...Прочитайте больше
- At first I thought it was defective because it was too tight, but when I pushed it in slowly and carefully, paying attention to the angle of the frame, it went in like a hammer. It may be a bit expens...Прочитайте больше
- [How is it used?Replaced during installation on an XJR400R Slip-on Silencer.I chose this KITACO product because it is a consumable and the OEM price was too high.How was your experience with it?The Si...Прочитайте больше
- SizeExactly and working well, no failures and no MOLLET.Прочитайте больше
- [How is it used?New CB1100 Exhaust System from OEM to MORIWAKISlip-on SilencerMegaphone Exhaust.How was your experience with it?It was shorter in length than the OEM Gasket, but has not leaked for ove...Прочитайте больше
- Arrived 3 days after ordering. The O2 Sensor was left in place, the exhaust system was installed, 3 bolts were removed, and the Gasket was installed. It was as if it was a new car (I don't know!). It ...Прочитайте больше
- I bought this to replace my Slip-on Silencer and there are no exhaust leaks, no doubt about it.Прочитайте больше
- Required Replacement Items when purchasing and replacing Slip-on Silencer.In most cases, the joint gasket that connects the silencer part to the exhaust pipe part will stick when heated and cannot be ...Прочитайте больше
- [How is it used?Purchased to eliminate the gap between the middle pipe and exhaust pipe in order to install a Slip-on Silencer.How was your experience with it?Exhaust pipe and Gasket are perfectly siz...Прочитайте больше
- [How is it used?Used on OEM Exhaust pipe and Silencer joint of MainMotorcycle's XJR1300C that had been inspected.The Exhaust System itself is the same as the normal XJR1300, so Gasket could be used no...Прочитайте больше
- Purchased to install YOSHIMURA's Slip-on Silencer.Since the vehicle was still new, I thought about reusing the one that had been installed, but I replaced it with a new one just to be safe.It was thic...Прочитайте больше
- The quality is good enough even if it is not OEMПрочитайте больше
- When I bought a SCProject Slip-on Silencer from Webig, I searched for Gasket as well.Motorcycle is GSXS1000 (22) It isSearch by Car Type Also, this product was a hit on the Slip-on Silencer's product ...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА