- [How is it used?Installed on a MONKEY 88cc Bore upSpec.The color is also red, so it is good to feel the change in appearance as long as it is noticeable.In the case of MONKEY, I used half cut.How was ...Прочитайте больше
- Purchased because the OEM was ka-chica-chi.I am satisfied with the Accent color as well!Прочитайте больше
- I think that the influence from the Ignition coil is dominant in both Spark strength and Noise, so you should choose a Plug Cable with a design that you like.Прочитайте больше
- I got it to start after about 1 turn in the Cell.Прочитайте больше
- [How is it used?Installed on ZEPHYRχ.Was the one you received as per Image?The appearance has changed dramatically.Was the installation difficult?This is a Level that can be done by beginners.How was ...Прочитайте больше
- This is a Plug Cable from NGK.It was put in as an Accent around the Engine.At the same time, the Ignition coil was replaced with one made by POSH.It looks cool, but I am not sure if the performance ha...Прочитайте больше
- [How is it used?Circuit's Sports drivingWas the one you received as per Image?Street ImageWas the installation difficult?Measure the dimensions of the originally attached plug cord before cutting. If ...Прочитайте больше
- This is a replacement from Nagao Electronics Ultra. Ultra's cord itself is good, but I replaced it with NGK's because it is too tight unless the insertion angle is 90-degrees. I use it for Utani SP-II...Прочитайте больше
- The image was installed on a YAMAHA FZr1000 3GM.Especially, 3GM strains are just stuck as shown in the image, so if you pull it out and process Shrinkable Tube, it is Large strong.We have always used ...Прочитайте больше
- Отличный высоковольтный кабель, покупался для Suzuki ZZ на замену штатному, прекрасно работает, свечной колпачок для под толстый наконечник свечи, ничего не нужно откручивать и при этом появляется над...Прочитайте больше
- I bought it to connect to AS Votani's SP?CoilThe same NGK Plug cord was used before this purchase, but it was a used diversion, so it was a good choice It was not long enough, so I bought a replacemen...Прочитайте больше
- I installed it in KSR-2 Normally, when installing to KSR-2, OEMCable removes it from the Ignition coil It is necessary to use a joint to install it because it is not possible, but because it is mental...Прочитайте больше
- high quality material used for the cable and cap.
very easy to mount,ideal for replacing old worn out cable.
very fast delivery to Belgium with economy mail (9 days).Прочитайте больше - Since it was time to replace Plug, exchange with NORMAL to Iridium plugs.I do not want Power Cord to Cut on the way, I chose this directly changeable from the base.I do not know which one is actually ...Прочитайте больше
- The code of Red NGK will be One Point.Honestly it is not clear how much the ignition efficiency is, but NGK reduces the anxiety factor through Season. Although it seems to be said to be over-Large eva...Прочитайте больше
- Since Plug cord and Cap of BALIUSOEM were damaged due to aged deteriorationWe exchanged NGK's here with trust and achievements.I also use the same thing in VULCAN 400, so I used it for cars so the...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА