- I replaced it at the same time I replaced the Ignition coil. It is a product that has been around for a long time and is reliable. To be honest, it is not about the performance, but the effect of the ...Прочитайте больше
- Purchased because the OEM was ka-chica-chi.I am satisfied with the Accent color as well!Прочитайте больше
- I think that the influence from the Ignition coil is dominant in both Spark strength and Noise, so you should choose a Plug Cable with a design that you like.Прочитайте больше
- I got it to start after about 1 turn in the Cell.Прочитайте больше
- [How is it used?Installed on ZEPHYRχ.Was the one you received as per Image?The appearance has changed dramatically.Was the installation difficult?This is a Level that can be done by beginners.How was ...Прочитайте больше
- I replaced the cable I was using with a new one and wanted to use the leftover cable, so I purchased this 1m cable.New beautiful Red and nice.If the cap shape fits, we would like to change the front s...Прочитайте больше
- Used and replaced to Cable by High powerCoil.It looks good, seems to be good in terms of Cable strength, and since it is NGK, there are no durability problems, and I am looking forward to the performa...Прочитайте больше
- This is a Plug Cable from NGK.It was put in as an Accent around the Engine.At the same time, the Ignition coil was replaced with one made by POSH.It looks cool, but I am not sure if the performance ha...Прочитайте больше
- [How is it used?Circuit's Sports drivingWas the one you received as per Image?Street ImageWas the installation difficult?Measure the dimensions of the originally attached plug cord before cutting. If ...Прочитайте больше
- This is a replacement from Nagao Electronics Ultra. Ultra's cord itself is good, but I replaced it with NGK's because it is too tight unless the insertion angle is 90-degrees. I use it for Utani SP-II...Прочитайте больше
- The image was installed on a YAMAHA FZr1000 3GM.Especially, 3GM strains are just stuck as shown in the image, so if you pull it out and process Shrinkable Tube, it is Large strong.We have always used ...Прочитайте больше
- Отличный высоковольтный кабель, покупался для Suzuki ZZ на замену штатному, прекрасно работает, свечной колпачок для под толстый наконечник свечи, ничего не нужно откручивать и при этом появляется над...Прочитайте больше
- I bought it to connect to AS Votani's SP?CoilThe same NGK Plug cord was used before this purchase, but it was a used diversion, so it was a good choice It was not long enough, so I bought a replacemen...Прочитайте больше
- I installed it in KSR-2 Normally, when installing to KSR-2, OEMCable removes it from the Ignition coil It is necessary to use a joint to install it because it is not possible, but because it is mental...Прочитайте больше
- high quality material used for the cable and cap.
very easy to mount,ideal for replacing old worn out cable.
very fast delivery to Belgium with economy mail (9 days).Прочитайте больше - Since it was time to replace Plug, exchange with NORMAL to Iridium plugs.I do not want Power Cord to Cut on the way, I chose this directly changeable from the base.I do not know which one is actually ...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА