1,653.09~ RUB
(2,706 иена)
5 (4 Отзывы)
Excellent
[M8x28mm P1.25] is used for concluding a front fork and caliper support.
[M10x25mm P1.25] is caliper support and a product made from brembo. It is used for concluding 65 mm of casting caliper pitch 4 pad.
In using it around a brake, 6 hole wiring h[M8x28mm P1.25] is used for concluding a front fork and caliper support.
[M10x25mm P1.25] is caliper support and a product made from brembo. It is used for concluding 65 mm of casting caliper pitch 4 pad.
In using it around a brake, 6 hole wiring hole processing (per one 945 (including tax)) was performed by the addition so that it might loosen and could stop and do in a wire lock.
Meat omission by the side of head circles is a hexagon socket, a hexagon wrench can also work now, the choice of a tool can spread, and the compact flange hexagon head bolt made from beta Titanium can raise working efficiency now depending on a place.
Processing accuracy is high and chamfering is performed also to the quite fine portion, and most cutting traces cannot be seen but it has become a very beautiful result.
The charge of a tool is also dramatically good and can apply torque firmly.
Since it is a product made from a titanium alloy, of course, it is dramatically lightweight, and it is that weight [ like ] which is like a product made from a plastic sensuously.
Ti-6A.I. Artificial Intelligence-4V of an alpha-beta alloy is adopted as a titanium raw material, and reinforcement, ductility, and toughness are high.
Since the drill hole for wire-locking also used the securing bolt of a caliper and caliper support as the bolt head with the type which has been opened in the whole surface (six holes), the wire lock of the slack stop was given, respectively.
Since metal cutting is performed one by one after pressing a raw material, the titanium bolt is carrying out very sharp and beautiful modeling, and fills a feeling of possession.
Since the reinforcement of a bolt is high, the fastening rigidity of each part also improves, and it becomes a weight saving although it is tens of g.
Since it excels also in corrosion resistance, a point strong against the dirt by many years past also serves as merit.
Only one point.
A dramatically expensive thing is a demerit.
Reviews For BETA TITANIUM Компактный фланец болт с титановым шестигранником М8 серебро From Other Webike User
Very Good
βTitaniumM8Compact Flange Hexagon BoltBolt of β Titanium I wanted to install before
The lower part of Front fork, AxelShaftClamp part
It is Bolt.
Bolt of β Titanium has become a troublesome rolling Screw.
Also, it is very lightweight because the material is Titanium.
I feel that I had a light feeling!
- The surface is subjected to anodizing treatment, it seems to be strong against rust and electric corrosion.
- As its name suggests, the head part has become Compact,
M8 is usually 12mm in many cases, Socket wrench is
10mm (Width of two sides) You can use.
- Hexagonal Wrench of 6 mm can be used inside the head.
Color is MB (Maziora blue) I selected.
Depending on the location, it is inconspicuous,
Self satisfaction is high!
Although it is the main objective to reduce weight and strengthen tightening,
Of course it's also Dress-up.
If you exchange it all together, you may feel realization of weight saving,
Present stage (Four) It is an honest place that I do not know.
Only expensive parts (Of course it is the corresponding Specifications)
Is it Demerit?.View Detail
Most Viewed Reviews Of BETA TITANIUM General-Purpose Bolts / Screws
Excellent
brembo×Beta titaniumWhen I changed the brake to brembo, I changed from Bolt to Beta titanium.
I think there is an effect, but of course I can't feel it, and rather the visual effect of not rusting is the purpose of Large.View Detail
Very Good
It's an extravagant use of...The Tandem Footpeg is not attached, but is a single seat Spec. and used as a blind lid for the Bolt hole of the footpeg.
I think 1,700 yen per bottle×4 bottles is indeed strange for such a use, but it is good.View Detail
Excellent
In Gold to match the Fork of the CB1100RS!Since the front fork of CB1100RS is gold, I wanted to change it to a gentler gold color for the details.
Get a Titaniumium Bolt and you get a sense of luxury and ownership!
I removed the OEM and put it on again to try it out. Then when I put this Titaniumium Bolt on, I'm impressed!
The Bolt turns and goes in smoothly.
I think it's such a highly accurate product.View Detail
Excellent
People are committed to everyoneThis is a work of art. Art objects, like paintings and pottery, can be understood from the viewers, but it means that they do not understand at all if they do not understand it. Screw 1 pc is thousands of yen! - - - I usually think so.
So, the people who choose this Bolt find values ??there, people who are committed.
Parts that I've been sticking to without compromising the most among Custom for decades ago are Bolt.
Because OEM is bound by Cost, most of those which carried out inexpensive surface treatment on steel. These Bolt et al. Immediately start to Rust and White, and even though it is a very small part, it will hurt the texture of the entire Motorcycle. SUS304 of Stainless Steel steel that I often see is corrosion-resistant but can not be used as a strength member.
If it is like Gold genus. Semi-permanently unchanged brilliance due to corrosion resistance, safety reliability due to high rigidity and fatigue limit also used for fighter aircraft.
Tetchen Bolt which is visible to the vehicle has almost changed.
Single Item Weight is half that of steel, but even if all of the vehicles are drinking cola 1 pc, it will be chara, so you will not be able to experience weight reduction. But there are a total of 19 in Rotor bolt of disc and Nut of Sprocket and it is a part that rotates at high speed, so it may be benefiting from that part. So, if you collaborate with Motorcycle as a characteristic of this product, it is a long way to get buried outside the head and disappear.. Especially as long as Bolt becomes.
I think that the evaluation of the person who bought this is divided into two "good, but expensive" "high but good".
My evaluation is the latter.
Once you fall in love, Titanium Bolt's magical powers.
How much did you change from past to hundreds? How much did it hurt in Total? I am afraid to calculate.
We recommend this product only for people who are committed to "high but good things".
View Detail
Very Good
βTitaniumM8Compact Flange Hexagon BoltBolt of β Titanium I wanted to install before
The lower part of Front fork, AxelShaftClamp part
It is Bolt.
Bolt of β Titanium has become a troublesome rolling Screw.
Also, it is very lightweight because the material is Titanium.
I feel that I had a light feeling!
- The surface is subjected to anodizing treatment, it seems to be strong against rust and electric corrosion.
- As its name suggests, the head part has become Compact,
M8 is usually 12mm in many cases, Socket wrench is
10mm (Width of two sides) You can use.
- Hexagonal Wrench of 6 mm can be used inside the head.
Color is MB (Maziora blue) I selected.
Depending on the location, it is inconspicuous,
Self satisfaction is high!
Although it is the main objective to reduce weight and strengthen tightening,
Of course it's also Dress-up.
If you exchange it all together, you may feel realization of weight saving,
Present stage (Four) It is an honest place that I do not know.
Only expensive parts (Of course it is the corresponding Specifications)
Is it Demerit?.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА