672.29 RUB
(1,100 иена)
614.23 RUB
(1,005 иена)
(9% OFF)
4 (12 Отзывы)
Average
Since the pilot was changed, it purchased together.
It is kind that a plug is two-pair attachment.
It is -, although it mistook once and being cut.Since the pilot was changed, it purchased together.
It is kind that a plug is two-pair attachment.
It is -, although it mistook once and being cut.
Reviews For M&H MATSUSHIMA Лампа мигалка пилот левый/правый автомобильный харнесс From Other Webike User
Excellent
EasyI bought this product for the pilot lamp of my Takekawa SquareLCDMeter, which I installed on my XR100R road spec. I also bought and installed the same product on my XLR80R when I changed the Pilot lamp and Blinker Valve to LED before.
The only thing you need to do is to interrupt the wiring and take out the earth, so if you have enough skill to do the Bullet Terminal at Electric Works Pliers, you can install it without much effort.
I always buy them when I need them because they save me the time and effort of selecting materials, mail-ordering, and making them myself, and I don't have to worry about the wire breaking.View Detail
Very Good
No problem if you have the knowledge.I used it to convert my SDR200 to BlinkerLED and the Instruction Manual was good and easy to understand.
The point to be noted is that it doesn't work properly if it doesn't interrupt the wiring just before the Pilot lamp according to the Instruction Manual.
At first I was impatient because it didn't work properly. It would be better if it was a little cheaper.View Detail
Very Good
barelyI changed to Light Bulb Type LED and IC Winnings to Relay but still got hazard in spite of changing to IC Winnings. I found this product on the net and it worked perfectly. The URL I found for reference is https://daradara.site/entry/halogen-bulb-led-bulb-turn-signalView Detail
Excellent
EasyWhen converting the Blinker to LED, the Blinker pilot lamp will be converted to a for Both With the Left and Right single light system, the blinker does not work properly
The quickest way is to pull the Valve on the Pilot lamp, but the risk of forgetting to turn it off is increased I will
This product has a resistor inside the Bullet Terminal, which can be connected to Blinker behaves normally
If you can do a little bit of electronics, it's easy to build something of the same caliber yourself, but if you can gather parts and tools, you'll be able to make it yourself The hassle of crafting with
I think it's a little bit expensive, but when you consider the time and effort involved, this product, which only needs to be installed, is a good and affordable solution I think
View Detail
Most Viewed Reviews Of M&H MATSUSHIMA Other Indicator Options / Repair Parts
Excellent
EasyI bought this product for the pilot lamp of my Takekawa SquareLCDMeter, which I installed on my XR100R road spec. I also bought and installed the same product on my XLR80R when I changed the Pilot lamp and Blinker Valve to LED before.
The only thing you need to do is to interrupt the wiring and take out the earth, so if you have enough skill to do the Bullet Terminal at Electric Works Pliers, you can install it without much effort.
I always buy them when I need them because they save me the time and effort of selecting materials, mail-ordering, and making them myself, and I don't have to worry about the wire breaking.View Detail
Very Good
No problem if you have the knowledge.I used it to convert my SDR200 to BlinkerLED and the Instruction Manual was good and easy to understand.
The point to be noted is that it doesn't work properly if it doesn't interrupt the wiring just before the Pilot lamp according to the Instruction Manual.
At first I was impatient because it didn't work properly. It would be better if it was a little cheaper.View Detail
Very Good
barelyI changed to Light Bulb Type LED and IC Winnings to Relay but still got hazard in spite of changing to IC Winnings. I found this product on the net and it worked perfectly. The URL I found for reference is https://daradara.site/entry/halogen-bulb-led-bulb-turn-signalView Detail
Excellent
EasyWhen converting the Blinker to LED, the Blinker pilot lamp will be converted to a for Both With the Left and Right single light system, the blinker does not work properly
The quickest way is to pull the Valve on the Pilot lamp, but the risk of forgetting to turn it off is increased I will
This product has a resistor inside the Bullet Terminal, which can be connected to Blinker behaves normally
If you can do a little bit of electronics, it's easy to build something of the same caliber yourself, but if you can gather parts and tools, you'll be able to make it yourself The hassle of crafting with
I think it's a little bit expensive, but when you consider the time and effort involved, this product, which only needs to be installed, is a good and affordable solution I think
View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА