After becoming this product, appearance is also felt refreshed, and since at
The appearance of the body guard who sold before was not [ that the black cap is taking lessons from the head and it is hard to carry out removal ] quite satisfactory, either.
After becoming this product, appearance is also felt refreshed, and since attachment and removal are also easy, it is a recommend.
Although such goods were attached also to the flange bolt of an exhaust pipe before, since it was a narrow portion, attachment was difficult.
Since he thinks that an exhaust pipe can also be removed substantially and there is nothing since a silencer will not separate if there is this product (it is severe if removed from the base of a silencer bolt), it is a recommend also at this point.
Exhaust System exchange and set, surely purchased. Except for this, I can not think of any further Exhaust System anti-theft measure (*^^*) However, I want more room for Length selection.View Detail
"I purchased for the theft prevention of a muffler (MAC-MRD). It is a mechanism in which it idles even if try to gather and turn the head forcibly with pliers etc. with the bolt which cannot turn, if there is no key for exclusive use. I think that the effect on theft prevention is very high. However, when using it for a silencer band, since it will separate if turned from the nut side if only the bolt is changed to this bodyguard, it is also necessary to change a nut for exclusive use. If I think so, price is severe. Although it is cheap considering being stolen, it cannot be denied that the foot is seen."View Detail
I think that it is functionally useful for theft deterrence also at appearance.
Since it thought that there should just be size deployment more with having liked you to use a stainles
It purchased to the theft prevention of an ohlins and a muffler.
I think that it is functionally useful for theft deterrence also at appearance.
Since it thought that there should just be size deployment more with having liked you to use a stainless for a raw material, they are four stars.View Detail
Although M10xL35xP1.25 of the size was mostly chosen with the Faulk side pure bolt, it is settled in Faulk at condition that a head section is nice (support is a product made from Active).
Incidentally with the pho
Zep750+BREMBO casting It is used.
Although M10xL35xP1.25 of the size was mostly chosen with the Faulk side pure bolt, it is settled in Faulk at condition that a head section is nice (support is a product made from Active).
Incidentally with the photograph, M10xL25xP1.5 (for BREMBO) is used for the caliper side (the bottom is an ordinary cap bolt, respectively).
Although there is little sizing, they are the goods considered well.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА