Since it is in reinforcement and satisfactorily cheaper than KTC although it used together with the lever of KTC and I tire-change-did, we recommend you.
[Work Purpose].
I ran 3 SPA direct entries, so I will reverse the Rear tire.
Required Tools
Tire Lever (this product) 3 pcs.
Tire Lever (long one) 1 pc
Bead breaker
4-5 sleepers (square timbers)
BEETWax
Other items include a tool to remove and install the Tire and a set of air tools.
Confirmation items
? Difference from inferior products
Inside of MT09Wheel
About this product.
[Merit]
The difference from inferior products is that the handles are stable.
Poor quality handles may rotate. If the handle turns, it is difficult to apply force.
The handle is made of resin, so it will not scratch the Brake Disc when the Tire is removed.
The Gold genus also has a smooth finish.
The finish is smoother than the cheap tool specialty store stuff (the long lever I use).
[Demerit]
A little short. Tire is hard in winter and may struggle a bit.
[use hang].
The Point to think about when removing and framing is the same.
To give the BEET a little more room.
This is the most important thing to be aware of.
BEET = innermost part of Tire (Rubber)
So what does it mean to make room for BEET?
The Wheel has a shorter diameter at the center of the Wheel than at the RimLimit.
Think of the diameter Image as follows.
(The difference is not that great. I am expressing this in an extreme way.)
Wheel helicopter:45 cm
Wheel Rim:43cm
BEET of Tire:42cm
Wheel center:40 cm
The Tire does not come off while running because a 42cm BEET cannot go over a 45cm helicopter.
So how do they fit in and out?
It uses the center portion of the Wheel (short diameter) to give the BEET more room.
As you can see in the picture in the last part of fitting the Tire, we hold the Tire with our knees and bring the BEET to the center of the short Wheel (short diameter part) to give a little more room at the top of the Tire.
Incidentally, fitting the BEET (42cm) of the Tire to the Rim part (43cm) of the Wheel is an air-ground pressure. The sound of the BEET fitting into the rim part of the Wheel (43 cm) is the sound of the BEET fitting into the rim part of the Tire (42 cm).
【Review】
I have done dozens of tire changes and have had no problems at all with Daytona Levers.
MT09Wheel
Here is what the inside of the Wheel looks like.
The base of the Spoke has been shaved.
It is unclear whether this is to reduce weight or something in the manufacturing process.
The color is also lighter.
I clean the Wheel with a Cray 556 and have no problems at all with this Wheel.
Oil stains can be removed cleanly.View Detail
Quantity:I had 1 Set of 2pcs. of Tire Lever from before, but I wanted another pc for MXTireetc. replacement, so I bought it!
The tip is thin and the Curve is moderate. Because it is short, it is easy to handle and it is not troubled with the storage place.
I recommend it when you want another bottle.View Detail
user-friendliness is good.It seems that an end part is a little thick compared with the
> Long lever, and this is convenient on the contrary although the clue made from the Long lever
It is using together with the Long lever of the company.
user-friendliness is good.It seems that an end part is a little thick compared with the
> Long lever, and this is convenient on the contrary although the clue made from the Long lever is made beginning, and a Bead is turned over in the direction of the circumference and it goes to it although there is no curvature on the wave which is caught easily and is easy to make a clue.
If it uses well, it will also be easy to fix by hooking on a short part, a Spoke, etc., and since it is convenient to decide the stage of the last which needs power by a Long lever after fixing, it may be convenience if it arranges in 2 another kind.View Detail
, it was easy to point out to a Tire easily, and it was thought that this Lever was the
A tip is somewhat wide, although it purchases to tire replacement and a difference is not so much thick compared with the Lever of the other company.Since it was
, it was easy to point out to a Tire easily, and it was thought that this Lever was the easiest-to-use.Since also making
is strong, there is likely to be no fear of having bent like a cheap article, when putting in power.View Detail
Spoon was slightly deep compared with the Long, and work carried out as itself and it was hot.
die length is also needed to a slight degree.I think that intensity is satisfact
It worked together with the DAYTONA Long tire lever.The bend of the
Spoon was slightly deep compared with the Long, and work carried out as itself and it was hot.
die length is also needed to a slight degree.I think that intensity is satisfactory and its me is unripe as
products.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА