10,350.43~ RUB
(16,943 иена)
4 (31 Отзывы)
Very Good
Convenient!If you do not desorb Fork, you can do Front up with this.
Using Rear stands simultaneously will rise without difficulty.
With this, you can easily perform Caliper cleaning and Wheel desorption.
You can use it on almost all vehicles.
Because storage also enters between Rear stands, it is good not to take a place.
Reviews For J Trip Вилка-подставка From Other Webike User
Excellent
It's handy to have!I had a front stand, but I found this product which is easy to insert into the hole at the bottom of the front CB400T and lift it up, and bought it immediately. The Rear stand is also made by the same manufacturer, so I can use it without any worries. Overall, I am satisfied with the product, although it is a bit expensive!View Detail
Very Good
Easy to useCompared to the front stand which hooks to the steering hole, the STAND is lighter and easier to carry and store. As long as you don't do any maintenance (such as overhauling or adjusting the protrusion), this STAND will suffice.View Detail
Very Good
Front wheel maintenance is easymainly "Cleaning the front wheels I haven't used it for two years, but … (Sweat.)
ahead of time I've got my gear up in the maintenance stand Use this one in the state If you try to lay down and only call this one, the chances of tragedy are very high, and Manufacturer It's dangerous if you don't use the rear stand first and in the Construction Manual
Take what the manufacturer says seriously and work with it (I beat my GLADIUS 650 with this one …
I think it is mentioned in the product description, but if you don't have a dent at the bottom of the Front fork, you can't use it unless your car has a dent at the bottom of the front fork It is not available, and the availability of vehicles equipped with Center Stand as standard is You will need to contact the manufacturer for confirmation
(a) SEA BASS/GLADIUS 650400ABS (In use atView Detail
Excellent
It is well made and secureI purchased it for Front tirefor Replacement It had been corresponding with Pantograph jack, but it is not possible to use Motorcycle in the past We bought it after a long time of worrying about it, because it was quite unstable that way It is very convenient for car wash as well as Tire exchange As a result, it is very convenient for car wash as well as tire replacement The front tire can be stored with the front tire floating, so the load on the tire can be reduced I amView Detail
Excellent
Trust based on solid constructionI used a low-cost version of the rear stand before I bought the company's tear stand because I was uncomfortable with its construction, and it was well made I have now purchased the Front as well I'm glad I bought it, cleaning the undercarriage, Caliper cleaning, etcView Detail
Most Viewed Reviews Of J Trip Front Stand
Excellent
j-trip 프론트 스탠드 멋집니다h2sx에장착해보았습니다너무 멋지네요~ 들어올리기도 쉽고 j-trip 스탠드 추천합니다혼자서 스탠딩을 하려면 무조건 j-trip 스탠드를 구입하세요리어도 구입예정입니다. 포장상태나 퀄리티 또 한 우수합니다많이 파세요~I tried installing it on h2sxIt's so cool~ It's easy to lift and I recommend a j-trip standIf you want to stand alone, buy a j-trip standThe rear is also scheduled to be purchased. The packaging condition and quality are also excellent.Sell a lot~translated by Google TranslatorView Detail
Excellent
J-TRIP J-Trip JTrip Front stand20I used it on the front stand of a certain cheap product, but ZEPHYR1100 was too heavy for it, but the J-TRIP product has a multistage height adjustment system that allows for free height adjustment. However, the J-TRIP product has a multi-stage height adjustment system that allows for free height adjustment. However, the price is about double that of the Net product, so it is necessary to secure a budget.View Detail
Excellent
Principles of ・・・・I'm a DAEG rider. 。 There is no problem in using it, but the Horn is in the way as a lifting place, or it is not usable because of the Horn. 。 I had to install it next to the Radiator and even Horn it because I was going to have a car inspection.
Now, the main question is, why is it so easy to go up, and who thought of that?View Detail
Excellent
I used it on my NSF100.I used it in NSF100.
It is useful when performing maintenance such as wrapping the Warmer around the Front or removing the Fork.
It has about 3 Piece and can be used for various vehicles.
The quality of the product is as good as JTRIP's.View Detail
Excellent
It's handy to have!I had a front stand, but I found this product which is easy to insert into the hole at the bottom of the front CB400T and lift it up, and bought it immediately. The Rear stand is also made by the same manufacturer, so I can use it without any worries. Overall, I am satisfied with the product, although it is a bit expensive!View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА