13,634.61 RUB
(22,319 иена)
4.8 (5 Отзывы)
Excellent
To MAJESTYI was wearing 40 mm Casting brembo.
When changing to Wave rotor due to support accuracy problem
Depending on how to install Support Caliper to Rotor
To be caught (When stuck during driving Full lock state) I think that there is nothing to loose and interfere if it is assembled tightly, but after all I was worried that it became uneasy and I wondered why everything will be redoneed and I reached installation with Overspecifications.
Since Support is out for the MAJESTY, install it somewhat and install it, Banjo attached to the Caliper can not bleed until you use air bleed with Bolt.
I think that effectiveness and precision are not completely dissatisfied with truly brembo and maintenance is also easy.
Personally I thought Release was better than the effect.
Quantity : 1 Set of 4pcs. There is also a good thing about Pad
Sealetc. Because it is a brand new ... I think it seems that the friction just after Release is lower than the two.
If it is a non-powerful machine, I think that it will be enough to know how much to reduce Friction anyway, so even in that aspect
I think there is a benefit. Just weight will go
(Because Support also becomes a reasonable weight)
If it does not have Friction and weight, we do not turn on Brake w Such a thing can not be done so it is difficult to think about that area ....
After a while for a while Pad cry came out. It's only a moment to catch up from Brake
"Hey ~~~" Sound sound.
It's like a bicycle like an aunty guy!
Although it does not do as much as the sound, even if paint is applied once again, whether to paint Pad grease or to chamfer it will definitely come out again after a while. I think whether you do not mind if you try it as good evidence. For those who care about squealing, the fight against crying may be waiting (Lol)
Reviews For brembo Радиальное крепление Тормозной суппорт P4 34/34 100мм From Other Webike User
Very Good
I am satisfied with Brake's TouchI installed it on CB 1300SB.
It is the cheapest RADIAL CALIPER in brembo, but I am satisfied with feeling like squeezing wet Sponge. Brake master is GALE SPEED's VRC. It will stop firmly.View Detail
Most Viewed Reviews Of brembo Brake Calipers
Excellent
The P2 rear brake caliper offers outstanding braking performanceAbout quality and texture - The P2 rear brake caliper from Brembo is made from cast aluminium with a black anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect.About the feeling of use - The P2 rear brake caliper offers outstanding braking performance with it's larger piston diameter and higher quality brake pads, while the look is also improved with the subtle black colour caliper.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P2 rear brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a rear brake bracket to allow for the mounting of the rear brake caliper.Difficulty of installation - The installation of the P2 rear brake caliper is an intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude, knowledge on disassembling the Honda Grom and the use of basic hand tools is what is required to secure the P2 rear brake caliper to the bracket and bleed the brake caliper.Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P2 rear brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P2 rear brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs with their variety, availability and pricing.View Detail
Very Good
Great product, great upgradeMalfunctioned stock caliper on a so this was a better option to go than OEM.I didn't expect much when I bought it.First try was in the long ride and I wouldn't spend this much money for the extra performance if I didn't have to.That was a game changer, especially on steep downhills.Brake precision and overall performance is far better. Braking at speeds above 100km\h made a big difference.braking distance is now noticeably shorter.Worth every penny. Also looks better on the bike than I expected.View Detail
Excellent
Is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the GromAbout quality and texture - The P4 right brake caliper from Brembo is made from cast aluminium with a gold anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect.About the feeling of use - The P4 right brake caliper is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the Grom with it's gold finish that matches the forks so well, not to mention the improved feel and braking performance with it's larger diameter pistons and higher quality brake pads.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P4 right brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a front brake bracket to allow for the meshing together of the Brembo brake caliper and the Honda lower fork leg.Difficulty of installation - The installation of the P4 right brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the P4 right brake caliper to the bracket and bleed the brake caliper.Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P4 right brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P4 right brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing performance products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very limited.View Detail
Excellent
Offers a stunning new look over the factory red brake caliper while also improving braking performanceAbout quality and texture - The P2 rear brake caliper from Brembo is made from cast aluminium with a gold painted surface finish and includes brake pads, the quality from the overall fit and finish is perfect.About the feeling of use - The P2 rear brake caliper offers a stunning new look over the factory red brake caliper while also improving braking performance with it's larger piston diameter and higher quality brake pads.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P2 rear brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a rear braided brake hose.Difficulty of installation - The installation of the P2 rear brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude, knowledge on disassembling the Honda Grom and the use of basic hand tools is what is required to secure the P2 rear brake caliper to the bracket and bleed the brake caliper.Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P2 rear brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P2 rear brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing performance products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic.View Detail
Excellent
perfectinstalled this brembo on w650, because stock ones are not quite good for me.it's not bolt-on for w650, you need to customize bracket and wheel space bushings. also you need to improve the main cylinder and brake diskView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА