4,636.71 RUB
(7,590 иена)
3.8 (14 Отзывы)
Подходит для:
HONDA CBR1000RRFire blade 04-07, HONDA CBR900RRFire blade 99-03, HONDA CBR600RR 03-14, HONDA CB1000R 08-14, HONDA HORNET600 00-12
View more
Very Good
Led bulge Blinker, no plan【What made you decide the purchase?】
Because the root of Blinker falls because of falling, Front's protruding Blinker Custom, for further LEDization. I think that CBR use is a safe word.
【How was it actually used?】
You can understand the blinking of the day from the side, but please think that there is almost no visibility from the front. In the evening, LED Blinker's main advantage is demonstrated. Visibility from Front also increases. It shines beautifully. However, it was said from a certain Shop that it does not pass through the vehicle inspection. It seems like it is Large, or if you do not see the opposite Blinker from the front oblique angle of 45 degrees, it will not work.. Please make it to the reference extent to the last.
【Was it difficult to install? (Hard parts case)】
Since Blinker's Wiring is a Bullet terminal, if it is set to Connector Type, there is a time and effort to turn off the Connector's terminal. Troubleshooting does not make it a Bullet terminal, I will watch crying at the time of a car inspection like me.
Also, since the length of Wiring is about 30Centimeter, I think that Length is sufficient. Blinker fixes to the back of Cowl with Plastic's Nut, but since the Flange face of Nut is Large rinse and Large is larger than the shape of the hole of Blinker, I made Cutting Pliers to cut Flange.
【Please tell me the installation point and hang (Hard parts case)
Before connecting it to the Connector terminal, I tried to turn on Check, I plugged a bare Wire into the Connector on the Motorcycle side, and I was doing well, the Fuse has run out while I do not know. Short easily, so please do not be stupid. It is a story.. Lol
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) None
[Is there anything I was disappointed about?]
If it matches CBR, I want you to tightly fit Nut's Largeness.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I hope to be able to adjust the output from Blinker's dent with Spacer etc..
【Have you compared items?】 Others' Universal LED Blinker
[Others] It is a completely self-filled world, but it became a satisfying Custom even if vehicle inspection did not go through. I am happy that security does not hit Blinker even if it falls. As Variation, there are three types of Orange, Smoke, Clear's Lens, so you like.
Most Viewed Reviews Of CHAFT Turn Signals
Terrible
SmallSmallish
not pass the inspection
Cannot be returned or exchanged.View Detail
Poor
The base is rubber, making it difficult to install depending on the car model.Root is Material:The more I tighten the Bolt for Rubber, the more it shrinks, and I don't know how much to tighten.
I tried to put it on a VMAX1200, but I also have Shield on the vehicle.
The VMAX1200 Shield is often installed together with the hole for the blinker, so when the Bolt is tightened to secure the Shield, the Rubber sinks into the Shield and cannot be securely fastened.
In the end, I managed to attach it after processing, but I thought that the material of each part should also be clearly stated in the product description.View Detail
Very Good
a shape like no otherIt is a form of ChaftBlinker that is not often seen in stores.
It took six months to obtain the product.
The size is more compact than I expected, but it is Exactly for SS Small Tail, and even though it is small, it is bright enough to be dazzling from the front.
The texture of the LED bulbs is not so good when viewed in detail, as the LED bulbs are unevenly aligned, but this is a product priced at less than 10,000 yen, so let's call it good.
It is important to note that the display is 1.5W compared to the OEM 3W, so it will be a high flasher if it is installed on a single unit.
(Some ChaftBlinkers are also Large sturdy)
I added a 47ω resistor and adjusted it.
Also, the hole size is not the same as that of the OEM blinker, so it is not possible to attach the Washer as it is. (M8) Additional parts such as the following must be purchased.
Naturally, processing of the terminals is also required.View Detail
Excellent
Looking for a Smaller BlinkerI don't like blinkers that stick out from the tail width, and I also don't like the trendy bean-bulb style, so I ended up with the smallest possible blinker and installed it.
It came with a Bullet Type Terminal, but I think it's a little too small. I had to reattach it myself. Also, I was worried about the thin Cable, but it's still working without trouble after about a year.
It also has EMark, so it passed the inspection without modification.View Detail
Excellent
ExpectedIt looks and visibility is perfect.
The car passed inspection without any problems.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА