2,459.98 RUB
(4,025 иена)
4.1 (25 Отзывы)
Very Good
RrBlinker expansionAfter changing from OEM to ACTIVE's License Plate Holder with LED Blinker, there are indications that acquaintances are difficult to understand and purchase as an addition to RrBlinker.
I do not care much about power saving (Or say, Battery's lifetime if Battery is hit by Blinker) So, usually buy things of Valve.
Both sides are affixed to the fixed position of the OEM, and W / H passed through the OEM mounting hole.
It took me a while to get through Wiring, but the neighborhood was up to Motorcycle.
Satisfied that it was said that it became easier to understand from acquaintances.
However, if it is an OEMB linker relay, it seems to be slightly high flasher.
Once 120 / There is no problem because it is flashing within minutes, but Blinker relay will be replaced with ICRelay.
I think there is sufficient performance as RrBlinker.
Reviews For PLOT Aero Flash From Other Webike User
Very Good
If ninja250 falls over, it will have the talk that a Cowl breaks because of that Blinker, and will opt for purchase.tampering with the
> Motorcycle is produced -- for the first time -- overly beginner I who say attach -- a start.
It took 1 If ninja250 falls over, it will have the talk that a Cowl breaks because of that Blinker, and will opt for purchase.tampering with the
> Motorcycle is produced -- for the first time -- overly beginner I who say attach -- a start.
It took 1 hour and 15 minutes.
-- about 1 hour of them struggles with removal of a Cowl -- it is -- although -- the ><
work itself is very easy.I consider [ understanding only by seeing, even if there was nothing, although it was once, and ] the
description.Fixation in the
Cowl is a quite powerful double-sided pressure sensitive adhesive sheet & Cable tie.Since it is [ the screw hole for fixation of a pure Stay, and two holes for wiring ] vacant,
ninja250 is unprocessed and it can attach it.There is direction in the
light, it sees from width and the steep one [ slant face ] becomes the backside.He attaches to reverse at the
beginning, he buys pressure sensitive adhesive tape, and it reattached.After
, since the color of the
Cowl and the color (white) of a sheet do not suit if it attaches as it is since a little pressure sensitive adhesive sheets are thick, it may be said that the side of a sheet is applied beforehand.
Since it is white, the direction which a boundary line worries is felt refreshed, if it sees from before after whether it becomes
?
Attaches.
It is pure and I want you to use this.View Detail
Very Good
It is used by Ninja250R.
If it is this blinker, the hole of a normal blinker can be hidden exactly.
About attachment, wiring of the normal blinker was corresponded with the cutting -> bullet terminal terminal in connector this side.
I think thaIt is used by Ninja250R.
If it is this blinker, the hole of a normal blinker can be hidden exactly.
About attachment, wiring of the normal blinker was corresponded with the cutting -> bullet terminal terminal in connector this side.
I think that it can do simply if the booklet of the corner of the electronic autoparts of a home center, etc. are read.
Fixation in a cowl becomes double-stick tape and a cable tie.
For the moment, it has not separated.
Once, direction should take care, when [ a certain ] and attaching.
In Ninja250R, it becomes with some high flasher a little [ after-attachment ].
Although he thinks that it has fitted in the specified range once, exchange of a relay is needed when worrisome.View Detail
Most Viewed Reviews Of PLOT Turn Signals
Excellent
For Universal ProductI am using it for 749S. It is completely in between Seat Cowl and Exhaust Guard. So it seems SMART than OEM and LED is very good visibility as well! I think that clear type and Smoke Type are also good pointsView Detail
Excellent
Since he wanted to have felt the circumference of a Tail refreshed with Muffler exchange, and to remove the Stay of Fender-less-izing and a pure Blinker, it purchased.Although he thought the fellow to whom the Blinker is attached to the License plate of thSince he wanted to have felt the circumference of a Tail refreshed with Muffler exchange, and to remove the Stay of Fender-less-izing and a pure Blinker, it purchased.Although he thought the fellow to whom the Blinker is attached to the License plate of the other company which the acquaintance is using at first, or that he would make it the LED Blinker of attachment, this product was found while searching this way and that.The Register also followed by
LED, and if it was this price, it was cheaper than the LED thing of attachment of the other company, and processing of the Seat cowl also regarded needlessness and an attachment place as it not being necessary to inquire this way and that, and purchased them.
It actually attached, and visibility is also enough, and well, appearance is also easy and has also satisfied attachment considerably.Supposing even
mentions a difficulty, is the attachment to the Stay of a Blinker a point of attachment by double-stick tape?Probably intensity will be satisfactory since
Blinker simple substance is light, but there is slight uneasiness.But since it may be divided in vibration if vibration, such as a Single and a TWIN, is a certain vehicle types very well if it is fixation with a Screw etc., it may be good rather.View Detail
Very Good
In case of a pure Blinker, it stands, and he hears that the way of a Cowl breaks in ゴケ, and it exchanges.The hole which removed
pure Blinker hid with a grinding sound as the photograph.Since it is really last-minute, change of inclination cannot beIn case of a pure Blinker, it stands, and he hears that the way of a Cowl breaks in ゴケ, and it exchanges.The hole which removed
pure Blinker hid with a grinding sound as the photograph.Since it is really last-minute, change of inclination cannot be performed.It fixes with
> double-stick tape and a binding band.Very easy.Although the direction besides
is written, Harness length is short in whether it is a premise using a conversion Coupler code.
Since I purchased the conversion Coupler of POSH, it arrived, but those who carry out only by plug processing need to extend by 20 cm.The quantity of light of the
> electric lamp is also satisfactory at all at the Wedge of T10.
Since it becomes an about 1.5~2-time High flasher, it is IC Blinker-relay recommendation.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА