-
Отзывы
-
Mounting to OEMSilencer
Данный товар был удален или в настоящее время не имеется.
Very Good
Mounting to OEMSilencerI installed only Exhaust pipe in Yamaha's WR 250 R.
Silencer wanted to change only the Exhaust pipe with a dare OEM, but there are not much information that Silencer is changing at the same time.
Removing the OEM Exhaust pipe and matching the Mega bomb, the joint part with the Silencer is a little thicker than the Mega bomb so it is quite hard without Gasket.
Because the stickiness of the connection part with Silencer is shallow, the Cylinder side did not reach as it was.
I just installed it because it seems I should push it somewhat more forcefully into the Silencer side.
The Silencer side is Exactly so unnecessary that Gasket is needed but in order to make sure it is liquid Gas is applied and the Cylinder side is shallow so that it is shallow so that I do not want it if there is a gap, so here as well.
I also tried using KITACO's Exhaust Gasket, but the inner diameter and thickness are the same as OEM, but the outer diameter is slightly smaller
If it is normal, there will be no problem but this time I used OEM Gasket because I was a bit uneasy.
The product itself is quite a Recommendation.
The throttle feeling at the beginning of Throttle opening and the feeling that it glows low speed are considerably reduced.
Combined with OEMSilencer, it was satisfying because it was compatible with silence.
Reviews For Current Product From Other Webike User
Very Good
hotAs it was exchanged at the same time as the Q4 HEX, its performance as a single body is unknown
As you may have misunderstood, Heat Guard is a chamber-shaped bulge that is It should be in the image area, not
This is where it makes the most contact with your leg
Melted it twice, PantsView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА