2,716.07~ RUB
(4,444 иена)
5 (8 Отзывы)
Excellent
Used in MONKEYAt the time of putting this, LED Bulb did not come out from Mukawa yet, but I bought this Valve from the reliability that OEM has adopted although the price is high. At the moment, LED is high performance at a low price, but at the time it was still high only with high performance, it was a fragile image, but this Valve has actually been used for 6 years, it is absolutely no Trouble. Excellent illuminance. You can run with confidence without having to dig your bear at night. Recently the same Valve was issued in Mukawa. What is the price "Half price" Although I regret a bit for the reason that I am a little regretted, those who are considering introduction from now on may be better, but since I have demonstrated the performance that it is not broken at all for 6 years, double price Although it issued, was not it sufficient that the original price was taken?
It is a product not ashamed of the name of M & H.
Reviews For M&H MATSUSHIMA Светодиодный L-образный луч для луковиц стоп/хвоста с подсветкой From Other Webike User
Very Good
A little expensive.There is almost no voltage drop even when Brake is applied while the car is stopped to charge the phone and use the Grip heater. The same situation with OEM bulbs was a few V drop, so the effect is very Large. The brightness is also sufficient.
It is a little expensive, so I give it ▲1 star.
Oh, and check the model number carefully when you order!View Detail
Very Good
LED for Tail and Number common lights[How is it used?
The tail lamp bulb was broken, so I decided to change to LED which I had been thinking for a long time.
Since it's an older model, the Number lighting is white and the Number lighting is a bulb color model.
Was the one you received as per Image?
As shown in product photos.
Was the installation difficult?
Simply remove the Tail lamp lens and replace it with an OEM bulb.
Easy to replace with just the Driver on-board tool.
How was your experience with it?
Brighter than OEM but not too bright and no flickering.
Maybe it's because the luminescence color is now Red, but it looks more distinctly Red than the OEM bulb.
Visibility in daytime seems to have improved somewhat.
[Included Parts:were they on?
Only the base paper and a simple Instruction Manual.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
As the description says, the part number that fits the Tail Lamp Bulb changes depending on the Socket orientation of the Tail Lamp Bulb, so it was a bit of a hassle to check (but I had no choice).View Detail
Very Good
It's expensive but good..Although I was attaching a cheap LED to the Stop lamp, it became useless in about 2 months, I made a lot of trouble deciding. Even if it is cheap, after all, since there is a case that will lose the purchase of cheap buyers, in any case it is safe to ride a Motorcycle hanging gold it is multiplied, otherwise it is an item I tried to save. I wish I had purchased this from the beginning. License Plate Light It will illuminate, and the Stop lamp is also bright, and consumption current is also small, so I am very satisfied.View Detail
Excellent
I think it's pretty goodLED Tail Bulb also has a white color for License Plate Light, but this is a light bulb color
There is no discomfort even with the old car.
Greed might be better if there are more LED elements.View Detail
Very Good
More than SP ○ ○ - - -It depends on the type of car you use, but it is obviously darker than the Normal valve when you attach the LED Bulb made of SP 0 to the KLX 250 on which I am on. I felt the danger and returned it to Normal valve. (Although there is no problem with VTR 250 - - )
M & H pine Stripe made domestically safe and sometimes referred to as a well-established Manufacturer, but I tried to buy it although it costs a little. It's brighter and more secure than at least SP 0.View Detail
Most Viewed Reviews Of M&H MATSUSHIMA Tail Lamp Bulb
Very Good
A little expensive.There is almost no voltage drop even when Brake is applied while the car is stopped to charge the phone and use the Grip heater. The same situation with OEM bulbs was a few V drop, so the effect is very Large. The brightness is also sufficient.
It is a little expensive, so I give it ▲1 star.
Oh, and check the model number carefully when you order!View Detail
Average
It's a bit expensiveI think this price is a bit high for Valve, but it's cheaper than OEM and I don't blame them. It lights up fine, but I'm not sure how durable it is.View Detail
Very Good
LED for Tail and Number common lights[How is it used?
The tail lamp bulb was broken, so I decided to change to LED which I had been thinking for a long time.
Since it's an older model, the Number lighting is white and the Number lighting is a bulb color model.
Was the one you received as per Image?
As shown in product photos.
Was the installation difficult?
Simply remove the Tail lamp lens and replace it with an OEM bulb.
Easy to replace with just the Driver on-board tool.
How was your experience with it?
Brighter than OEM but not too bright and no flickering.
Maybe it's because the luminescence color is now Red, but it looks more distinctly Red than the OEM bulb.
Visibility in daytime seems to have improved somewhat.
[Included Parts:were they on?
Only the base paper and a simple Instruction Manual.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
As the description says, the part number that fits the Tail Lamp Bulb changes depending on the Socket orientation of the Tail Lamp Bulb, so it was a bit of a hassle to check (but I had no choice).View Detail
Very Good
It's expensive but good..Although I was attaching a cheap LED to the Stop lamp, it became useless in about 2 months, I made a lot of trouble deciding. Even if it is cheap, after all, since there is a case that will lose the purchase of cheap buyers, in any case it is safe to ride a Motorcycle hanging gold it is multiplied, otherwise it is an item I tried to save. I wish I had purchased this from the beginning. License Plate Light It will illuminate, and the Stop lamp is also bright, and consumption current is also small, so I am very satisfied.View Detail
Excellent
I think it's pretty goodLED Tail Bulb also has a white color for License Plate Light, but this is a light bulb color
There is no discomfort even with the old car.
Greed might be better if there are more LED elements.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА