I am using it for Yamaha's original two kinds off-road motorcycle, XTZ 125.
The Grip end of XTZ 125 is a Non-Penetrating formula, of the type whose Grip's Rubber covers the end part as it is. Therefore, if a branch interferes with the end of Grip due to running along a forest road or the like, Axel is forcibly turned, or Axel gets hard to return. It is extremely small possibility, but it is still a phenomenon that happens occasionally. So I bought a Bar end plug to protect the end part.
I will explain the structure of this Bar end plug together with the attached image. Tightening Bolt from the direction of Pink color, the Knurl processed part spreads in the direction of Green color. This Knurl process part is fixed by digging into the inside of Handlebar.
In the actual work, in the case of XTZ 125, it starts from the processing of the end of the Grip end. Cutter etc. cut out the Rubber at the end part into a circle of Large size through which this product goes, then insert Bar end plug and tighten the work. At this time, it is good to tighten in advance to some extent and spread the Knurl processed part. Since it can not be tightened without getting caught, the work will proceed easily by spreading it according to the inner diameter of Handlebar. Also, on the Axel side, there is something like a transparent Washer attached so as not to disturb the rotation of the Grip, but if you overconfidently confine it and tighten it, Axel will not move. So, I think that it is better to fix this place at a position with a margin rather than closely attaching it here.
I do not feel anything like a negative aspect by installation. I think that it is a good product that will complement the protection functionality and the apparent Dress-up. And usually Bar End has its own width and has a shape that protrudes out, but since it is made very thin, I do not want to have an off-road motorcycle with a wide Handlebar width, or a less prominent Bar End It is very good for people.
Fits: KAWASAKI VERSYS1000 12-14, KAWASAKI NINJA1000 (Z1000SX) 11-14, KAWASAKI NINJA2 Helmet50RR 08-12, KAWASAKI NINJA400R (-2013) 11-13, KAWASAKI NINJA400 (2014-) 14
While other manufacturer's products have a single color for the large body, this one has a two-tone color and a good texture.
However, it is not that heavy, so it may be better not to install it for vibration reduction purposes.View Detail
Fits: KAWASAKI VERSYS1000 12-14, KAWASAKI NINJA1000 (Z1000SX) 11-14, KAWASAKI NINJA2 Helmet50RR 08-12, KAWASAKI NINJA400R (-2013) 11-13, KAWASAKI NINJA400 (2014-) 14
For the ZX - 14R "2 Axis 2nd order Balancer" Has been adopted
Although vibration is fewer, Axel is opened at a fixed opening
Right wrist becomes numb from step by step as running.
Although I was already used to it, it was okay as it was,
"Dress-up" I also exchanged the Bar End.
Select ZETA from the following three candidate candidates.
"AGRAS (94 g)" "REAL BALANCE (440 g)"
"ZETA (180 g)"
ZETA with high strength Duralumin at the end
Balance weight Stainless Steel 2-pieces Structure
It has become a.
OEM includes Screw lock (Looseness prevention) Apply
It is quite powerful as it is being done
(Because ZX - 14R is a hexagon, Screw Mountain is hard to lose
I'm glad.
Match it with the color of Lever and it looks good
It was done..
Weight is almost halved (OEM 330 g → 180 g) And vibration
I would like to confirm in the future how it changes.View Detail
Fits: KAWASAKI VERSYS1000 12-14, KAWASAKI NINJA1000 (Z1000SX) 11-14, KAWASAKI NINJA2 Helmet50RR 08-12, KAWASAKI NINJA400R (-2013) 11-13, KAWASAKI NINJA400 (2014-) 14
Blue 's Bar End was attached, but scratches became conspicuous, because the color did not fit nicely, exchange.
There is a sense of quality, I like Design. Thanks to the price, I think that Large is strange! I'm worried about Gold, one week !! Thinking of the year, I made Titanium.View Detail
Fits: KAWASAKI VERSYS1000 12-14, KAWASAKI NINJA1000 (Z1000SX) 11-14, KAWASAKI NINJA2 Helmet50RR 08-12, KAWASAKI NINJA400R (-2013) 11-13, KAWASAKI NINJA400 (2014-) 14
The quality of a product is very high. Moreover, just like a genuine part, it can be attached. Tone and texture are very good.
The size is short about 2 mm at full length as compared with a genuine par
The circumference of a handle became gorgeous!
The quality of a product is very high. Moreover, just like a genuine part, it can be attached. Tone and texture are very good.
The size is short about 2 mm at full length as compared with a genuine part. There is no crevice between it and a grip. It is finished with high precision.
Especially the logo of an end portion has a carve lump with painted color. It was good as is not a simple print. Although a portion in color and aluminum place are looked as one unit, they are separated. The aluminum place weight is heavy. The end collar part is made of a light material.
In addition, an attached cap bolt are stainless steel materials. It does not look a cheap product!View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА