We attached it to WR 250 R in combination with PowerBox. Predecessor Ad Vise Street M10 × 20P1. Prepare 25 Bolt in advance and have a correct answer. Installation is almost pon attachment. I was processing the Japanese specification but I'm touching a little Frame.
It's pretty, but it's pretty difficult to stall with this combination (Lol) The low-speed Torque valley disappears spectacularly. As the valle disappears, the feeling of riding Cam disappears and it is easy to get on.. But it is compatible with the well-running Engine and the 4-speed 100 kilometer arrives quickly and we are paying attention to the speed breach.
It was a wonderful seasoning than any TRAIL you've ever had. Moreover, it is not violent like Racer but feeling tired.
I am satisfied with performance, sound and quality. By the way, burning + 3, ai removed from Air cleaner Blowby discharge, EXUP removal, Diaphragm removed. There is no AfterFire.
The exhaust system is Exactly right for the WR, and it goes great with the SP Tadao.
Power Core is also recommended for Exhaust System.
If you are concerned about the noise, you can suppress it by putting on the Low noise inner.View Detail
I wrote about the Power core blast
It's popular and pricey, but first of all it looks, sounds and performs
There's no doubt about it!
The popular exhaust pipe, PowerBox, and the best compatibility, and we have put on both of them the..
The PowerBox is too Garbage and Bigli
The normal exhaust pipe is much better than the normal exhaust pipe in terms of both fee ring and power output ! (I lost 15,000.)
The normal exhaust pipe gets all the power up to the red zone at once against
The PowerBox feels like the power is gently constant, and the Axel's luck drops
(I guess it's just that it's easier to handle for people who only use low RPMs
250 is so quick, I'll be spinning around to Red It's more of a hindrance...)
Honestly, all I need is an FMF Silencer!
View Detail
We attached it to WR 250 X together with SP Tadao - Power Box, KTM - Inner Pressure Control Valve. Cancellation between AIS and EXUP.
When installing, it is impossible to mount it unless the Bolt length of Center is Limit and the Exhaust System is pressed Exactly to the vehicle body side. The joint with Exhaust pipe is perfectly connected by using liquid Gasket.
The exhaust sound is quite annoying. The sound like Helicopter, the pedestrian frequently looks back. Until I got used to it, I felt starkly conspicuous and felt embarrassed, my family was told I was a reckless family. It may be better not to buy people who feel NORMAL is annoying.
Moreover, since it is a considerably missing Exhaust System, we think inevitably improving the intake system and adjusting the fuel injection. When OEMAir cleaner was left intact, there was a considerable shortage and I was annoyed by AfterFire in Axel on from Emblem.
After Clearance of Air Clean Box's top cover, hole drilling in Box's side lid, after changing to Air cleaner in Notebook, even after setting fire pressure +6 AfterFire AA ceased to appear. If capital gains allowance, ECU renewal or sub computer installation should also be done.
I do not know whether the Exhaust System Single Body is affecting, but the fuel economy for driving has increased to the Large width. From town ride 22-24 km to 30 km ~ and so on. It may be possible to expect up to 35 kilometers for a touring in a distant place.
View Detail
The ease of handling at low speed is visibly improved. Gelo - It will not be stalled unless it stays in a gallelet etc.. It will accelerate even one high GEAR.
Installation was done with reference to the Instruction Manual and Net articles and completed in about an hour. I think that it is better to work with two or more people because it is easy to install when there is a person to support it. Apart from doing the removal of EXUP's Wire by force, there was no particular step to stepping on. I did not do any special processing.
I connected to SP Tadao's PowerBox, but if I paint liquid Gas cleanly Gas will not leak and fit perfectly.
The exhaust sound is further emphasized when Baffle is removed with the bass called Dodododo. When I took off Baffle I felt that both Torque and Power went up. I think that it can not be recommended in a residential area because it is said to be Level which can be heard even from afar from home to return home.
View Detail
It is an impulse that we use by assembling it to SP Tadao POWER BOX.
The delivered box was wrapped in Air cushion and packed in FMF 's Corrugated cardboard. Exhaust System Body and Instruction Manual (English Version) And Sticker, and Gasket?.
As for POWER BOX Q4 was connected to Liquid Gasket in the same way because its longitude is large. There was a dent in Mid pipe, and processing to escape the interfering part was done.
When assembling it, the fixing of the Exhaust End portion does not face the side of the vehicle body, it became close to the vehicle body center. Since I was purchasing M10x20's detailed Bolt beforehand from the advance information, I tried to stop Bolt from the center of the vehicle body side to the side as far as the limit did not protrude.
I think that this way of attachment is still funny, when I fixed it to the side, the exhaust system is positioned diagonally against the mounting surface.
I do not know whether the POWER BOX is bad or the processing accuracy of Q4 is bad, but it was quality that somewhat.
Although it is sounds and Specifications, the volume is the volume that certainly causes inconvenience in the residential area. I feel noisy when I opened Axel, especially since Idling. I like it..
I feel that starting from the time of stopping is more stable than NORMAL. As you accelerate it will be 100 km more than NORMAL / Acceleration up to h is coming soon. I certainly feel like Torque has increased. (There is no exact source as it is not a chashidai.)View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА