Although it seems that it may take time to lay somewhat to an amateur, I think despairing Fork can be removed at any time and I think that Cospa is good. If the Fork diameter is the same, it can be installed in other Motorcycle. Quantity : 1 Set of 2pcs. So - - - !
【What made you decide the purchase?】
I bought it for setting out, as a result of exchanging Front fork 's internal Cartridge for items outside the company.
There were other Manufacturer's items, but Quantity : 1pc. Besides, there was only a thing that was more expensive than this product, so I chose the cheapest 56design thing.
【How was it actually used?】
If you want to measure how much you are doing a stroke while driving, it's like Tie Wrapetc sold at Home center. Although I think that it is enough, I am satisfied with the appearance which was gathered without incongruous feeling that was attached as a special item.
The performance of the Sensor itself is satisfactory, and we keep with the place to the place where I stroke without loosening even when running..
【Mounting was difficult?】
I had a hard time because I had to extend Spring to an extent that it could not extend and fix it.
It was a place I flew Spring several times when wearing it and it got lost in danger.
Those who do not have confidence think that it is better to ask those who are proficient in PRO or hand.
【Please tell me the installation point and hang】
If you extend the spring for fixing too much, it will stretch out and it will not be usable, so be careful.
Also when you fix it also you need to be careful not to catch Spring firmly with your fingers because it will fly to the day after tomorrow and lose Spring.
Because I thought that Garbage and dust entered the gap between Sensor and Inner Tube and it seemed to be scratched, I thought that it was scratched inside the Sensor (Inner Tube contact surface) I am applying Silicone oil to.
[Is there anything I was disappointed about?]
Performance as Sensor has no problem.
However, once you removed Garbage and sand grains that were in the gap between the Inner Tube and the Sensor, Spring got stretched and it became useless anymore.
It would be better to consider it as a disposable after wearing it once.
In my case I install it on One Side, it is depending on the dirt, but it is exchanged in about 3 months ~ about half a year.
【Hope for Manufacturer - Please let me know if you have any improvement points]
The installation of Spring is difficult, but there is no help for structure, so especially improvement points etc. None.
【Have you compared items?】
- Integra Front forkStroke sensor
Quality seems to be good, but the number of deposits 1 pc. I wonder if 3,000 yen is too high.
[Others]
Even outside Fork and NORMAL's Fork, Pre-roadetc. I think that it is a required item for Fork which can be adjusted.
I am going out for Touring in the center of Tandem, but since the behavior of Suspension is quite different from Large at the time of one person and Tandem, this Sensor which can visually confirm the state of Front fork is now to let go Can not.View Detail
I found this item if I am looking for a 46 mm for Front Fork Stroke sensor.
As you know, Shinya Nakano is a product of 56 DESIGN, but why it is the lowest price with two entries! Moreover, I was able to purchase cheaper more because it was just 15% being withdrawn.
Although it is quickly installed, there is no instruction manual !! To Package "I wonder how to install it like this" I installed a reference as it has some kind of photos. Please note that Spring is thin so careful twisting and pulling too much will cause Spring to stretch and not to have Inner Tube Wound (thin paper or curing Tapeetc. It protects Inner Tube with).
I installed it on the Right Side, it will be a bit delicate and detailed work so please settle down.
I do not know how durable it is, but from the place of attachment it is unavoidable to get dirty, there may be Spring's elongation and break!
Since that point is two, I would like to exchange it if I use it to a certain extent.View Detail
Until now, the stroke sensor was made in time with a tie wrap. 56 racing made, compared with other manufacturers cost performance is also good, purchased. Order 41 mm inner diameter. Item arrives, quickly, wearing!. How, although it is 41 mm, is it a sky?. I thought it was something wrong, I checked the package and item number, no mistake. The inner diameter of the two sets is 42. There are also 5 mm and 43 mm, adjust the inner diameter with a nipper and a cutter, a file, also adjust the spring of 5 milicut for the color hold down and mount it. At first I thought to have it checked and get it replaced after returning it to the WEBIC, but it will take time and troublesome, so it can be processed, so it is better to say that it is okay - - -
View Detail
Up to now, the adjustment of Pre-road was referring to the same Motorcycle person in Net, but if you lose weight, how to apply Brake is also different.
By using this product you can set pre-road in a short time and it is easy to proceed to the next process.View Detail
I also feel OK with Tie Wrap
I think this one is Cool.
Installation is easy, but Spring connection
I am a little irritated because it is not working well
did (? ▽ ?)
Quantity : 2pc. Since it is set in 1 pc. I will spare.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА