As a point different from the photo, the anti-slip Rubber was a cheap Sponge like material. If you use it once, the adhesion is Gap, you can predict that it will be taken.
You can buy a Rubber at home center and paste it.
There is also rattling on one side of Roller, there are times when the rotation gets stiff.
I hope to devise how to turn the Tire, but it is very regrettable.
Overall, I am good at Cost performance, but I do not even know if it is better to understand that there are prices too.
This product is built very well. It is made of some type of metal and is very sturdy. The rollers are textured to prevent the tire from slipping. The bottom also has little pads to prevent the whole stand from moving. The tire is much harder to rotate than I thought it would be. If the bike is on its kickstand and you spin the back tire, the entire rear of the bike will move off-center. Bike will need to be perfectly straight with front brake applied to be easier to use.View Detail
ของถึงรวดเร็วมาก วัสดุที่ใช้แข็งแรง ใช้งานง่ายทั้งล้างรถและบำรุงรักษา แต่ยางรองตัวยกหลุดง่ายเพราะกาวติดชิ้นเล็ก เมื่อโดนน้ำหนักรถกดทับก็จะเลื่อนหลุด ต้องดึงทิ้งVery fast Strong material Easy to clean and maintain. The rubber is easy to lift because the adhesive is small. When the weight of the car is pushed down, it must be pulled.(translated by Google Translator)View Detail
Used in SEROW This allows for easy Chain, Wheel and Spoke maintenance I think it's hang to ride up straight If you put it on the Roller at an angle, it doesn't rotate well I used to be a bit of an oopsie, but now I can take care of it properlyView Detail
This is enough for ChainMaintenance place!
As you can see, the anti-slip Rubber on the back was taken at once. It seems that the adhesive dissolves with Cleaner used in ChainMaintenance.
There is no problem at all (Lol)View Detail
To care for 125cc MOTARD for clogs, and purchase.
I forgot what Sale, but it was a bit cheaper.
Considering putting it on Maintenance Stand, there is no doubt that it is easy.
Compared to STAND, it is also subject to evaluation that it does not take place.
Motorcycle tilts more than you thought.
Although the position of the Tire is high, since the length of the Side Stand remains unchanged,
Is commonplace?.
Then, since it becomes a shape to be oblique to Roller,
Power is needed to turn the Tire.
It is Large strange.
Let's find a board with a thickness of 2 to 3 cm that can be laid under the Side Stand.
Also, as it is a premise to lean toward the Side Stand side,
Chain side of the main turns downward..
Therefore, Chain cleaning becomes hard to change Large.
You still need a plate to lay under Side Stand.
It's a bit painful with this Single Body,
Be sure to prepare a thick board that can be laid under the Side Stand.
If you have prepared it, you can say that it is not that bad tool.
View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА