12,947.76 RUB
(21,185 иена)
4 (15 Отзывы)
Very Good
It is also convinced of NAKED Design, it exerts power to the windproof effect of midwinter【What made you decide the purchase?】
Purchased for the purpose of wind protection in the winter.
NORMAL's Handlebar around Handicard dedicated to the model of the premise is also sold by other companies, but my MT-09 is equipped with an external radial master cylinder, so I thought the installation was suspicious, only on the Bar End side I was looking for a Universal Type Hand guard to fix with.
Search variously and compare - As a result of examination, we reached the purchase of Dual roadHand guard of ACERBIS of Design which seems to be uncomfortable even when wearing on MT - 09.
【How was it actually used?】
?Design?
Speaking of Hand guard, it is an image of Off-road, but we are satisfied with Design which does not feel uncomfortable in Motorcycle for Road.
?Quality - Texture ?
The surface finish is textured and it is very astringent.
It was already peeling off just when Plating in the Logo portion of ACERBIS arrived at hand. It's a small part so it does not stand out, but it's a brand new with this brand new.
?Safety?
Hand guard itself is all resin so it's a bit uneasy to think about anything.
I think that it is a better Level than nothing compared with the Hand guard of Gold genus for Off-road.
?Windbreak effect?
Since the area of ??the hand guard is small, high-speed etc etc. Winds come around as they come out with speed, so it is impossible to prevent the wind perfectly.
However, since there is no thing that can block anything at all, it will definitely prevent the wind from being in the state of NORMAL, so I think that you can feel the effect especially when traveling in the middle of winter.
In my case I'm wearing a Grip heater on my car, so I was able to do the midwinter long distance touring without difficulties with the guards of Hand guard and the warmth of Grip.
?Vibration?
Because it is fixed only on the Bar End side, so when driving at high speed etc.. Although I was concerned about the vibration of Gold, since it can be fixed to Handlebar and Firmly with Gold Adapter, there is almost no vibration.
Just because I fix all with Bar End part, especially long distance Touring tighten up etc before departure etc etc. Checking
【Mounting was difficult?】
?For Universal Handlebar?
In the case of the external large Universal Handlebar of Large Foreign, the inside of the Handlebar is Flat, so if it is compatible with the inside diameter, it can be mounted as it is using the supplied Adapter.
Though it is dangerous to throw in GripLimit and aim for the beauty of appearance, it is a thing called humanity, but especially Throttle side is dangerous if it interferes and hinders movement, so it secures a certain Space of the attached Color I think that I am relieved.
?In case of OEMHandlebar?
Large Mr. OEMHandlebar says Screw is cut in the inside of the Handlebar, the installation can not be easy.
I am sorry that it became a story limited to MT - 09, but I purchased Posh 's Solid Bar End OEM Handy type Yamaha M16 Type separately and diverted only the Adapter part and worn it.
Even if it is not Posh's Bar End, I think that it can be diverted if it is a type of Bar End that fixes Bar End with Bolt of M8 with OEM Handlebar compatible Bar End.
I also wrote above but do not forget to secure the space with Grip.
?Others?
Brembo 's Radial master cylinder is attached to my car, but since it was discovered that it will interfere with hand guard installation, we are processing it.
Disassembled the Hand guard, cut the resin of the Smoke part with Hot cutter, cleaned the section with File and Compound and finished it.
As the hand guard is bent toward you, I think that machining is necessary for vehicles equipped with a radial master cylinder, not limited to brembo.
【Please tell me the installation point and hang】
I think that it is a thing that wants to attach to the Stylish without making a gap between Hand guard and Grip, but especially if Throttle side interferes with Grip during running it is Large and it is dangerous and it is dangerous, so the attached Spacer It is safer to wear it with a margin using.
[Is there anything I was disappointed about?]
It is unnecessary because it was made from the shape with the Universal Product and processed and prepared at will.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think it is a bit expensive considering as a Hand guard of All resin.
Preferably Aluminumetc. I wanted you to reinforce with lightweight Gold genus.
【Have you compared items?】
None.
[Others]
Speaking of Hand guard, it is an off-road image, but I think it is an ambitious product to overthrow it.
Depending on the type of car you may not be able to wear polo, but because it can be anything depending on diversion and processing, so if you say that your hands are cold and unavoidable when driving in the middle of winter, on this occasion, how about hand guard?
Most Viewed Reviews Of ACERBIS Hand / Knuckle Guards
Excellent
Hand guard is the only choice.[How is it used?
I bought a CRF125F and put my old hand guard on it, so I bought an additional one for my real car, an RM250.
In the past, I used to use a closed type hand guard attached to a bracket that grew from the ZETA Stem and used a solidly spec. that never turned the hand guard, but I decided not to use a solidly spec. that ignored the flexing characteristics of the handlebar, as it was tiring and caused my arms to However, I decided not to use the SolidlySpec. because it would tire me out and cause my arms to rise.
When I was looking for a hand guard that would protect levers without interfering with their bending characteristics, this was recommended to me and I have been using it ever since.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It's easy, you're right about Bracket going around the bottom of MASTER. Sometimes I see brain-dead people who put it through the top.
How was your experience with it?
The handlebar is flexing even though it is closed! And it has the strength of Closed! It turns with the MASTER, so neither the MASTER nor the hand guard will break! It will not break even if you roll it with a lot of force!
And it's the best. Let's get rid of the aluminum hand guard.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I would be happy to buy Repair Parts.
We are trying to protect the TRI FIT that we are throwing away by asking around as much as possible to protect it and get the parts out of the way.View Detail
Very Good
Easy to use, no matter which Handlebar you install!Now installed and in use on CRF125F.
Minimoto has many hand guards that cannot be installed due to severe space and bending caused by the short length of the handlebar.
We purchased this product because of its ingenious Bracket routing and angle, and because we were able to confirm that it could be installed on Minimoto.
Since there is no aluminum, etc. in the product, it is lightweight, as expected.
I really like that the Handling is not too heavy.
Although the Guard itself is not as strong as the Gold products, it can be installed in such a way that it does not fasten to Solidly but rotates moderately when impacted.
Therefore, even after several falls, the Brake/ClutchLever was able to protect it well without breaking.
The price is very good for a hand guard and I am very satisfied with the functionality. I would have given it 5 stars if the price was a little lower.View Detail
Very Good
CRF50F.Installed on CRF50F Small School 3rd-6th Grade Spec.
The size is perfect, but the mount part is silver-colored resin, not aluminum.
However, considering the fact that these parts are designed for kids, I think resin is the right choice in terms of forearm entrapment accidents (bone fractures).
I could feel the kindness of ACERBIS towards KidsRider!View Detail
Very Good
Maybe better than the previous VisorType.The VisorType I had on before may be good for rainy days, but I rode about 50km yesterday (Jan. 31) and this one may be more warm-proof due to its wrap-around shape. And although I don't want to fall, I feel more secure, and for someone like me who is not confident in riding, I think I may have a little more room for something.View Detail
Excellent
It's plastic, but it looks very rigid.Purchased for use with HUSQVARNA TE250i.
The HUSQVARNAOEMHand guard that I have been using until now is made of aluminum and the rigidity is supposed to be high, but for some reason the compatibility is bad, the lever breaks every time I fall, and the repair parts of the hand guard are hard to get. I decided to use ACERBIS as a trial.
The great thing about this Hand guard is
Can also be used in Open end
The protection effect can be changed according to the usage (for example, you want to protect only stepping stones, or you want to protect your levers when you fall).
In my case, I wanted to increase the protection effect when falling. [Strong] (Instructions are on the reverse side of the product).
It's not that difficult to install on the Husk, but you will need to move your Switches around a bit.
I haven't driven the car yet, but it seems to be stiff and supple, so I will continue to use this Guard.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА