1,967.09 RUB
(3,220 иена)
4 (4 Отзывы)
Very Good
There was no problemI used it to change Seat of SEA BASSDF 200
Although it was the first Seat Replacement, it was possible to change it without problems.
Just my arm is immature, but Seat's warped part can not fit well
I have become a Wrinkle by all means.
Heat gunetc. If you pull it while warming at
Because I did not have those tools I give up and I am on a ride while I can do Wrinkle
Sitting comfort etc. There is no particular problem
Reviews For MADMAX Мото седло MADMAX From Other Webike User
Excellent
Used for free rides!HardEnduro, G650 XCOUNTRY, Enduro, KTM and Freeride, which have been doing a great job on the forest road touring. Seat has been done recently, so I put this product on it and made it beautiful!View Detail
Excellent
Big Li in a better way than I expectedI used it on my SEA BASS DR250R
It was a used car in poor condition and the Seat was torn to shreds
When I peeled off the outer layer, I was surprised to see 3 layers of surprise & hellip; lol
It seems to have been forcibly repaired over the course of its long history
This time I was worried about OEM and DACHI Seat Cover, but it is a good price, so I was super I bought a cheap Mad Max Off-road Vehicle Seat Leather It was
The seat and the SIDE are separate from each other, with the seat surface being the normal leather and the SIDE It was punching leather
Cutting is also considered, and the seat of the Off-road motorcycle is unique to the It is designed to form a triangle when viewed from the right side
Because it is made to the Large texture to some extent, I think it is acceptable if there is a little anchoring
You may be able to limit the perfect Triangle Seat if it is 250cc class
Or perhaps the distance required in front and back would be shorter if you made it a triangle?
I used a Dryer to warm it up and a HandTucker to fasten it
First of all, position the front and back and snap with the HandTucker
From there, you can go laterally, diagonally and Quantity:Pair (for Left and Right) It was decided rather nicely when I fastened it to the uniform etc
If you pull too much, the Seat base will warp and go away, so only Wrinkle You just need to be careful about pulling a good pull without looking
In the unlikely event that it warps too much, you can remove one of the front and back and re-fasten it once
There will be some Wrinkle in the corners, but it's acceptable for poor amateur repairs
This is a recommendation for those who can't afford an external Seat or an OEMSeat Cover
In addition, it does not seem to have been treated with waterproofing, so there is no quantity:If you stop the 1pc.Vinyl, the Seat sponge will be hard to submerge in waterView Detail
Average
Fit is not goodSince the joint of OEMSeat has split, purchase it for changing oneself.
I guess I do not know what to do, I'm going to a little Wrinkle on the Front. However, since it is a permissible range, it is a favorable evaluation in view of Cost.View Detail
Most Viewed Reviews Of MADMAX Seat Covers
Excellent
Used for free rides!HardEnduro, G650 XCOUNTRY, Enduro, KTM and Freeride, which have been doing a great job on the forest road touring. Seat has been done recently, so I put this product on it and made it beautiful!View Detail
Excellent
Big Li in a better way than I expectedI used it on my SEA BASS DR250R
It was a used car in poor condition and the Seat was torn to shreds
When I peeled off the outer layer, I was surprised to see 3 layers of surprise & hellip; lol
It seems to have been forcibly repaired over the course of its long history
This time I was worried about OEM and DACHI Seat Cover, but it is a good price, so I was super I bought a cheap Mad Max Off-road Vehicle Seat Leather It was
The seat and the SIDE are separate from each other, with the seat surface being the normal leather and the SIDE It was punching leather
Cutting is also considered, and the seat of the Off-road motorcycle is unique to the It is designed to form a triangle when viewed from the right side
Because it is made to the Large texture to some extent, I think it is acceptable if there is a little anchoring
You may be able to limit the perfect Triangle Seat if it is 250cc class
Or perhaps the distance required in front and back would be shorter if you made it a triangle?
I used a Dryer to warm it up and a HandTucker to fasten it
First of all, position the front and back and snap with the HandTucker
From there, you can go laterally, diagonally and Quantity:Pair (for Left and Right) It was decided rather nicely when I fastened it to the uniform etc
If you pull too much, the Seat base will warp and go away, so only Wrinkle You just need to be careful about pulling a good pull without looking
In the unlikely event that it warps too much, you can remove one of the front and back and re-fasten it once
There will be some Wrinkle in the corners, but it's acceptable for poor amateur repairs
This is a recommendation for those who can't afford an external Seat or an OEMSeat Cover
In addition, it does not seem to have been treated with waterproofing, so there is no quantity:If you stop the 1pc.Vinyl, the Seat sponge will be hard to submerge in waterView Detail
Very Good
For Seat Replacement of old carCrack found in Seat of RD 50. Since it is a car more than 30 years ago, parts are not supplied.
I bought it for Re-covering.
【What made you decide the purchase?】 There are many exclusive items, but Universal Product is few. I searched parts and found them.
【How was it actually used?】 Material is also firm and feel like.
【Was it difficult to install? (Hard parts case)】 Installation is now. I plan to reassign it as soon as the crack gets bigger.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Can be replaced even with 100 Tucker
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 Color and texturing are also close to OEM, I think Fit.
[Is there anything I was disappointed about?] nothing special.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I wish there would be exclusive items for RD 50. I think it is impossible - -.
【Have you compared items?】 None. I think that there are few Universal Products.
[Others] AnyView Detail
Excellent
No problemSeat which was reattached was quite complicated shape, but the dough is soft and stretch is good so it fits neatly. I rarely ride so I do not know the durability.View Detail
Average
Fit is not goodSince the joint of OEMSeat has split, purchase it for changing oneself.
I guess I do not know what to do, I'm going to a little Wrinkle on the Front. However, since it is a permissible range, it is a favorable evaluation in view of Cost.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА