Because of the oil leak of the Front fork, the timing of Overhaul has been changed to Front and Rear It's very easy to ride in the woods after the change
* Это НАИЛУЧШИЙ и ДОСТУПНЫЙ ПО ЦЕНАМ магазин для приобретения японских мотозапчастей.
* Зарегистрируйтесь сейчас и получите удивительные скидки и другие выгодные предложения!
* Более 2,000,000 разных товаров. Невозможно НЕ НАЙТИ нужные вам запчасти и экипировку.
Поздравляем! Ваш новый аккаунт создан успешно! Теперь вы можете воспользоваться особыми привилегиями для клиентов Webike и получить наиболее выгодные предложения. Если у Вас какие либо вопросы, пожалуйста, обратитесь к нам через ОБРАТНУЮ СВЯЗЬ.
Подтверждение отправлено на электронную почту, указанную Вами при регистрации аккаунта. Если письмо не получено, попробуйте связаться с нами через обратную связь.
Because of the oil leak of the Front fork, the timing of Overhaul has been changed to Front and Rear It's very easy to ride in the woods after the change
Fits: KAWASAKI KLX230 20-21, KAWASAKI KLX230R 20-21
The springs are just enough stiffer to make them great for trail riding. You will still bottom out on big jumps, but not too stiff.View Detail
Fits: HONDA CRF250L(S) 21, HONDA CRF250Rally(S) 21, HONDA CRF250L(S) 21, HONDA CRF250Rally(S) 21
Rear was hardened and front was hardened because it felt soft.
If you know a little bit about maintenance, you can replace it without any problem.
I'm hoping to be able to up the pace on the forest roads.
It is recommended to replace the top cap at the same time as spring replacement.View Detail
Fits: YAMAHA WR250R 07-17
It is considerably softer than OEM.
Traction feels Well applied and is easier to ride.
I feel that this slows down the response to fast turnarounds and the like.
I think it is perfect for off-road driving.View Detail
Fits: HONDA CRF250L 17-20, HONDA CRF250Rally LD 17-20
good point
vehicle height increases (approx. 10mm)
A bad point
Shock is Large Threshold (Obviously.)
I left the spring replacement work to the shop along with the fork oil change.
I replaced the rear suspension with MD38's, and the height of the car was raised another 10mm.
I tried it over the curb and the impact was still a bit of a gusher.
I haven't tried it on the off-road yet, but I think it has reduced the anxiety of getting stuck on bumps, etc.
If the Rear is set to NORMAL, the Rear sinks a lot when you ride.
It is recommended to replace with Rear at the same time.View Detail
Fits: KAWASAKI KLX125 10-16, KAWASAKI KLX150S 10-16
[How is it used?
I bought this product because it bottomed out when I lent it out to my friend who is a Large threshold of the body.
Was the one you received as per Image?
It's a functional product, so you can't tell the difference at all from the outside, and if you replace it, you can't tell even more because it goes into a place you can't see.
Was the installation difficult?
As you can see in the picture, if you remove the handlebar and the top cap of the fork, you can easily replace the fork with the OEM product. (This picture was taken for the purpose of impressions, so you should remove the fork from the car and check the fork oil level and adjust the oil level) If you have any questions please feel free to contact us.
How was your experience with it?
The same friend ran the same Course and it didn't bottom out anymore, so it definitely works.
If I get in. "The Front fork has stiffened. I could firmly feel the
[Included Parts:were they on?
No instruction manual or specification table. "Only Spring! This is a graceful product of
[Was there anything that disappointed you?
There is no change in the amount of suspension stroke, but it becomes harder at the time of sinking, and the return after sinking becomes faster, so there may be no Merit for people with light weight. "I kind of want to trade." I don't think it's a product that
Other items that would be helpful include
Point and hang of installation
When you pull out the OEM spring, the amount of fork oil will decrease, please measure the amount of fork oil according to the service manual.
I think it would be better to adjust the rear shock to match the front shock for better balance (I made the rear spring 2 steps harder).
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, if you are not sure about replacing it yourself, don't hesitate to ask the shop.
[Notes]
Make sure you have the correct amount of Fork oil for the decrease as mentioned above.
[ITEMS TO BUY TOGETHER
I think it is better to buy OEM or fork oil according to your preference.
[Opinions and requests to Manufacturer
It is better to have Instruction Manual, but I think it is also better to have various tables (Spring rate etc.).View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
Чтобы продолжить просмотр данной продукции на веб-сайте Webike для японского рынка (на японском языке), нажмите кнопку "Перейти к Webike в Японии".
Клиентский сервис
ИНФОРМАЦИЯ
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА