Motive for purchasing
The 4.5mm thickness of the OEM Disc Rotor is not enough to make the Circuit run on the Main The touch of the brake is not good enough, and the heat of breaking is also a measure against heat I was looking for a Disc Rotor I wasn't looking for a product that expensive, but the 5.5mm Disc Rotor was the choice It's either the brembo SUPER SPORTS 750 Type or this MADE IN There were only two choices for the SUNSTAR PremiumRACING In terms of price, the SUPER SPORTS750 is more expensive than the QUantity:The price per pc. was low, but when I checked the stock, it was not yet in stock … automatically PremiumRACING was the only choice for (Lol)
About the product
You can order to your liking
PremiumRACING also allows you to change the color and design of the Merit One In this case, I made the following Order
[OuterType] Hall & Slit (which was the only way to go)
[Inner type] Type L (choose the lightest type as it is heavy at 5.5mm)
[floater] semiFloating (expect durability and MaintenanceCycle)
[Pin's Color] Black (because it's the cheapest)
The inner is designed to be the lightest because the outer is heavier, but the circuit runs We'll have to wait and see about the durability of the Pin on Breaking I wanted to make it floating, but I tried to make it semi-floating for durability first I did
It's easy to replace each part of the after-surface as well, so if you have any concerns, try it out! I think
Touch has been improved as intended
The thicker Disc Rotor reduces the amount of Piston pushing out when breaking So, control of the breaking process has been greatly improved When I was using the Rotor, I felt like I was gripping it as hard as I could, but even with the same Pad, the effect was different from the start You can see that the heat resistance has gone up by the thickness Moreover, heat resistance has gone up only to the extent of the thickness, or maybe, Lever is in the middle of a circle even if Brake is continuously applied It is no longer coming into
The price is reasonable, but I personally think the improvement in Brake performance is better than changing Caliper I think you'll experience it better if you change the Disc Rotor
Fits: SUZUKI BOULEVARD M109R 10, SUZUKI BOULEVARD M109R 09, SUZUKI GSX-R750 07, SUZUKI BOULEVARD M109R 12, SUZUKI BOULEVARD M109R 13
【What made you decide the purchase?】
The OEM Rotor got worn and it was time to replace.
Although I was looking for various replacement items in various ways, when I repurchased an OEM I lacked in the White side and I thought that it would be wise to upgrade Brake by replacing expendable items anyway..
I got lost as brembo, GALFER, Breaking, but because brembo is Floating, Touch is good but durability remains anxious. Since GALFER and Breaking are paired Barrels, I wonder if Judder will come out.
That's why I bought a favorite purchase after Breaking that it is possible to customize cheap prices and stable performance of domestic production, as well as disc's Design and Pin's color.
【How was it actually used?】
Very good!
Brake fee Ring improved by replacing from worn OEM (Resurrection?) Did.
Even when Breaking to Hard, I feel that Motorcycle's posture is more stable than before.
Also, I chose Hole Type without daring to enter Slit this time.
It seems that this one is lighter than entering Slit and he did not want to increase the weight under Spring, so it is a choice of Hole Type.
【Was it difficult to install? (Hard parts case)】
Anyone can do it with Front stand and Torque wrench.
Very easy.
【Please tell me the point of installation and hang (in the case of Hard parts)】
When using Front stand, depending on the type of car, Shaft may strike the STAND and may not come off when you unplug Axle Shaft and remove Wheel.
It's only a matter of cutting off Handlebar and dealing with it, but please do so careful not to defeat Motorcycle at this time.
Moreover, if there is a part that holds Caliper such as Front stand made by Ethos, work is easy.
Finally, it is better to leave the installation Bolt of the disc as a new item.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Since it is a Brake part, there is no.
[Is there anything I was disappointed about?]
Is Inner's design somewhat sober?.
Although I can choose Pin's coloring with a great deal, I also want Inner's design to be Parenthesis good.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I'd like more choices for InnerDesign.
【Have you compared items?】
Brembo racing Brake rotor, GALFERBrake rotor, BreakingRotor
[Others]
My GSX-R1000K7 does not have the setting of Works Expansion.
For SUNSTAR, K7 please also add Lineup of Works Spanned Rotor.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА