ZX10R (2017), Fender with the assumption that the OEM Blinker will be relocated Fill up the mounting hole of the Eliminator KIT and install an external Small TypeBlinker I used it as a pedestal to mount it
Although not mentioned in the product information, the thickness is 3mm, and the protruding part that fits into the blinker mounting hole is 3mm The height is 1mm
Other companies' products:(Aluminum) seems to have a thickness of 4-4.5mm and a convexity of about 1.5, so the material The strength of the surface (this product is an ABS plastic used in OEM Cowletc I am anxious
There is no problem with the very lightweight Small TypeLED Blinker, but the Large swing I don't think it's suitable for installing the Blinker made by Gold
The shape of the protruding part is a few millimeters smaller than the OEM blinker mounting holes It's not an exact fit
When tightening up with the Bolt to prevent gaps, if the thickness of the mounting hole on the body side is 2mm or more, use this product It's a bit scary, considering the flexibility of ABS plastic (which is surprisingly not very flexible and brittle) that it can distort It is
In my case, I have two of them, Quantity:Glue 1pc. to the body side (the reverse side of the car) and then glue the two gaps (my In the case of the Motorcycle, the thickness of the hole was 3mm, so you can fill the gap of 1mm)1.After sandwiching the 3mm thick Double-sided Tape, it is already in the Quantity:Covered with 1pc. and Bolt (Blinker axis) Softly I'm tightening it up
Product The Hole The size of the M8 is M8, but it is a governor when you actually put the M8 Bolt through
Depending on the shape of the Blinker which is installed, I think it is necessary to insert Washer etc. of ExactlySize. of ExactlySize may need to be inserted
I have a lot to worry about, but it's about 1/3 of the price of the second cheapest de*tna product I think that it can be said to be a good deal because it can be avoided by the combination with Blinker and the ingenuity at the time of installation It is
Fits: KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs., KAWASAKI Z900 18-21 [Model]ZR900BJF/BKF Front/Rear/Product requires 2 pcs., KAWASAKI Z800 17 [Year]13/14 [Model]ZR800ADS/AEF Front and rear/2 pieces of product are required.
Used a set of these bases to mount aftermarket turn signals on the front of on my Kawasaki Z900RS Cafe. Great product! Bases fit the inside opening where the stock turn signals were located and the hole size was just large enough for the mounting shaft on the new signals.View Detail
Fits: KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs., KAWASAKI Z900 18-21 [Model]ZR900BJF/BKF Front/Rear/Product requires 2 pcs., KAWASAKI Z800 17 [Year]13/14 [Model]ZR800ADS/AEF Front and rear/2 pieces of product are required.
Used these bases to install aftermarket turn signals on my Kawasaki Z900rs and they are a perfect fit. Takes 2 bases per turn signal, one for the outside and one piece for the inside. Opening for my aftermarket turn signals was was perfect diameter for the turn signals I used to replace the stock turn signals. View Detail
Fits: KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs., KAWASAKI Z900 18-21 [Model]ZR900BJF/BKF Front/Rear/Product requires 2 pcs., KAWASAKI Z800 17 [Year]13/14 [Model]ZR800ADS/AEF Front and rear/2 pieces of product are required.
I think it could have been made of steel if I wanted.
It's not like it's cheesy with a crazy Plastic feel.
Chaft, used with Sphere Light Blinker installationView Detail
Fits: KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs., KAWASAKI Z900 18-21 [Model]ZR900BJF/BKF Front/Rear/Product requires 2 pcs., KAWASAKI Z800 17 [Year]13/14 [Model]ZR800ADS/AEF Front and rear/2 pieces of product are required.
It's plastic, so it looks cheap.
If you are looking for a quality product, the recommendation is to use another manufacturer's Gold.View Detail
Fits: KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs., KAWASAKI Z900 18-21 [Model]ZR900BJF/BKF Front/Rear/Product requires 2 pcs., KAWASAKI Z800 17 [Year]13/14 [Model]ZR800ADS/AEF Front and rear/2 pieces of product are required.
I used it to replace my Z900 Blinker with an Other Brand Product.
The M8Size is perfect as indicated by the M8 standard.
Thanks to this, I was able to install the external Blinker without any problems.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА