562.28 RUB
(920 иена)
537.83 RUB
(880 иена)
(4% OFF)
5 (3 Отзывы)
Very Good
Used for the Hose for HELSince the Brake hose of HEL is used, Banjo bolt of the same brand is selected
Banjo is sometimes slightly different in each Brand thickness, so Hose and Banjo are the same It is safer to match the Brand The product itself is neither acceptable nor unacceptable; it is made of stainless steel, so I think it is highly corrosive
Reviews For HEL Banjo Bolt Single From Other Webike User
Excellent
Caliper stainless steel banjo bolts No point refitting those old OEM Suzuki steel banjo bolts when it comes time to change out the OEM rubber brake lines for some stainless steel braided brake lines from HEL Performance. The cost of these bolts are market priced and the quality is excellent with no complainants from me. When ordering replacement banjo bolts or bleeder screws just keep in mind there are different diameter and thread pitch bolts and screws available from Webike and make sure you know what your motorcycle needs. Installation is straight forward just fit new copper crush washers and tighten to the required torque as per OEM specifications.View Detail
Most Viewed Reviews Of HEL Banjo Fittings
Excellent
Upgraded Stainless Steel Banjo Bolt for the GromAbout quality and texture: I am happy with the quality of the banjo bolt from HEL, made from stainless steel and sized in M10 with a metric thread pitch of 1.25. Nice that new copper sealing washers are also included.About the feeling of use: Previous owner of my Grom reused the OEM banjo bolts when installing stainless steel braided brake lines and the addition of the HEL stainless steel banjo bolts has now completed this upgrade. They look perfect with their slim design and wonderful surface finish.Products to buy together: Some stainless steel braided brake lines would also be desirable to purchase along side the stainless steel banjo bolts and HEL also have these on offer here on Webike.Difficulty of installation: The process to install takes about 30 minutes, position some rags to soak up any brake fluid that may leak out when the old banjo bolt is removed and install the stainless steel banjo bolt with it's new copper sealing washers and torque down to 34N m. I also bled the brake line to ensure no air was introduced into the system during the replacement. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a durable stainless steel banjo bolt as compared to the aluminium banjo bolts on offer from the majority of the companies and at no significant price difference.About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: There are numerous designs, sizes and thread pitches available in banjo bolts so be sure to research and purchase the correct ones to suit your motorcycle.View Detail
Excellent
Caliper stainless steel banjo bolts No point refitting those old OEM Suzuki steel banjo bolts when it comes time to change out the OEM rubber brake lines for some stainless steel braided brake lines from HEL Performance. The cost of these bolts are market priced and the quality is excellent with no complainants from me. When ordering replacement banjo bolts or bleeder screws just keep in mind there are different diameter and thread pitch bolts and screws available from Webike and make sure you know what your motorcycle needs. Installation is straight forward just fit new copper crush washers and tighten to the required torque as per OEM specifications.View Detail
Excellent
Fastener upgrade while swapping out brake linesWhen the maintenance job came up to upgrade to stainless steel braided brake lines on my Suzuki SV650 it was a no brainer to also upgrade the master cylinder double banjo bolt. Braided brake lines from HEL performance were used so to was their fastener to eliminate the chance of introducing problems into the installation process. The stainless steel double banjo bolt is excellent quality and the price is reasonable. No hesitation to use HEL perforamnce products again in the future. Do not forget to replace the copper crush washers when doing a job like this to prevent the possibility of fluid leaks.View Detail
Average
Used for HEL's HoseSince the Brake hose of HEL is used, Banjo bolt of the same brand is selected
The thickness of each brand of Banjo is sometimes slightly different, so it is better to use the same brand for Hose and Banjo. As for the product itself, it is not so bad, because the Banjo and the air-removal nipple are integrated, it can be used for the Brembo caliper in part.View Detail
Average
HELBanjo for HELHoseSince the Brake hose of HEL is used, Banjo bolt of the same brand is selected.
Banjo has a slightly different thickness of each brand, so it is safer to use the same brand for Hose and Banjo.
It is with a nipple for air extraction, which can be used for some models such as the Brembo caliper where the nipple for air extraction is integrated with the Banjo.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА