5,620.25 RUB
(9,200 иена)
3.8 (14 Отзывы)
Very Good
Looks great, but sometimes the Wiring process is necessary.First of all, I bought it because it looks good.
However, as is true of almost all the Blinkers made overseas, it is not possible to connect the Bullet Type Terminal to the Blinker Coupler kit made by other companies, such as KIJIMA, etc., because of the thin wiring. (This product was 0.5mm.)
In addition, because the Bullet Terminal was not attached to the Small Terminal and the Waterproof Cover was not attached, I reattached the Bullet Terminal which I had here.
(I used a hot-melt tube to connect it to the 1.25mm Wiring and then put the Bullet Terminal on.)
I'm very happy with the texture of the Blinker and the light level is bright enough that I would recommend it if you can do a wiring process.
The Plus minus instructions on the back of the warranty were novel and helpful.
Reviews For CHAFT Светодиодные поворотные сигналы From Other Webike User
Excellent
Looking for a Smaller BlinkerI don't like blinkers that stick out from the tail width, and I also don't like the trendy bean-bulb style, so I ended up with the smallest possible blinker and installed it.
It came with a Bullet Type Terminal, but I think it's a little too small. I had to reattach it myself. Also, I was worried about the thin Cable, but it's still working without trouble after about a year.
It also has EMark, so it passed the inspection without modification.View Detail
Most Viewed Reviews Of CHAFT Turn Signals
Terrible
SmallSmallish
not pass the inspection
Cannot be returned or exchanged.View Detail
Poor
The base is rubber, making it difficult to install depending on the car model.Root is Material:The more I tighten the Bolt for Rubber, the more it shrinks, and I don't know how much to tighten.
I tried to put it on a VMAX1200, but I also have Shield on the vehicle.
The VMAX1200 Shield is often installed together with the hole for the blinker, so when the Bolt is tightened to secure the Shield, the Rubber sinks into the Shield and cannot be securely fastened.
In the end, I managed to attach it after processing, but I thought that the material of each part should also be clearly stated in the product description.View Detail
Very Good
a shape like no otherIt is a form of ChaftBlinker that is not often seen in stores.
It took six months to obtain the product.
The size is more compact than I expected, but it is Exactly for SS Small Tail, and even though it is small, it is bright enough to be dazzling from the front.
The texture of the LED bulbs is not so good when viewed in detail, as the LED bulbs are unevenly aligned, but this is a product priced at less than 10,000 yen, so let's call it good.
It is important to note that the display is 1.5W compared to the OEM 3W, so it will be a high flasher if it is installed on a single unit.
(Some ChaftBlinkers are also Large sturdy)
I added a 47ω resistor and adjusted it.
Also, the hole size is not the same as that of the OEM blinker, so it is not possible to attach the Washer as it is. (M8) Additional parts such as the following must be purchased.
Naturally, processing of the terminals is also required.View Detail
Excellent
Looking for a Smaller BlinkerI don't like blinkers that stick out from the tail width, and I also don't like the trendy bean-bulb style, so I ended up with the smallest possible blinker and installed it.
It came with a Bullet Type Terminal, but I think it's a little too small. I had to reattach it myself. Also, I was worried about the thin Cable, but it's still working without trouble after about a year.
It also has EMark, so it passed the inspection without modification.View Detail
Excellent
ExpectedIt looks and visibility is perfect.
The car passed inspection without any problems.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА