I replaced the terminals and coupler when diverting the Handlebar Switch from another car.
It has been very helpful to have Rose parts sold in small quantities like this.
I completed the modification and installation without any problem on the function at the moment, but the spec. of the Emon product is different from that of the OEM product.
I hope it's not inferior to the OEM product when used for long periods of time or in poor conditions, such as in rainy weather.
Used for 6PCoupler of MONKEY-based Engine.
Some Engines are processed and cut, so this is essential in such cases.View Detail
In order to use the Yamaha OEM thin switch, I was planning to use the Coupler from the original Kawasaki OEM switch. However, the Throttle of the zx6r that I was going to use at the same time was difficult to install, and there was a possibility of putting it back together. I wanted to make it the same color as the Kawasaki Coupler, but I had no choice.
The Harness that connects to the Switch has the same 110 type 6-pole Coupler Male as this product, and the YamahaOEMSwitch also has the same 6-pole Male, so it was necessary to replace the Coupler. I checked the wiring of each switch and the wiring diagram of the zrx1100, and inserted the 6 wires into the female position of this product. Because the type is the same, it is possible to connect it exactly, and there was no problem at all functionally. I'm very happy with the way the Switch works.View Detail
I bought it for replacing the Indicator of GRASS TRACKER.
If you go to the automatic for Vehicle goods store, there are plenty of items of Emon's goods, but there are cases where the number is small in the Home center. The home center is near from my home, but the automatic for Vehicle shop is far, so I will buy it at Webike.
The product has no problem. This Recommendation.View Detail
You can buy it even at Home center, but purchased because it is used with Relay.
Wae Big comes in handy because there are many kinds that are not comparable with the shop front.
Emon's quality was able to interrupt without any problems with OEMHarness without problems.View Detail
It was used for repulling a Harness for Laon Donnay's Safety Department article its original work.Although the Coupler by the side of a car body was dramatically hard and attachment and detachment were serious, truly, the product made from an Emon is accurate, and it becomes [ it ] and attaches easy to detach it.Since it is easier to have been able to detach and attach at once with 6 pole Coupler and wrong connection can also be prevented rather than a plug terminal ties one at a time by Motorcycle with many opportunities to detach and attach the Safety Department article by an Off-road motorcycle etc., it is convenient.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА