Forbidden? I installed it on the VZ-RAM in the RX7X, which is a legitimate mainstay of the RX7X, because I could see the effect of the VZ-RAM on high winds, crosswinds, and driving winds in Large vehicles.
Even with VZ-RAM installed, I felt a good feeling of neutrality with no blur, and I tried out the RX7X with a full face to see how it would change.
First of all, the installation is almost without problem as shown in the instruction manual, and it doesn't take 5 minutes, and this is naturally, but both VZ-RAM and VZ-RAM were installed with Exactly as a special option.
The VZ-RAM's Diffuser's Aero fin is a fixed type, so I didn't care about it, but the RX7X has a fixed fin position 1 (Lowest position.) will not be available.
It was tested by driving at high speed and going around town and mountain roads in the vicinity after installation, but the sense of neutrality and the sense of not wavering which cannot be said to be indescribable as well as VZ-RAM, and the feeling of wavering was not bothered at the time of the test in spite of the situation where there were many crosswinds.
Also, I didn't feel it with the RX7X without the Spoiler, but the RX7RR4 and 5 have a small tickle of vibration at high speeds? It seems that the visibility is secured tightly, and this is the area where you can concentrate on the riding that GPRider praises. Perhaps you can see the large changes and effects on the high speed CircuitCourse.
Feeling, is Ventilation ventilation of Ventilation also thanks to negative pressure regulation? I felt like there was more ventilation than before, this is something I didn't notice in the VZ-RAM of Opening, which has a lot of ventilation.
Anyway, I'm sure it will be easier for you because it will be stable without any shaky feeling, which will still reduce the fatigue that will resonate later on in long distance and high speed driving.
It also makes you look even better. (If I dare to compare it to AGVSpoiler without mentioning performance, I think Shark type is better looking, but...)
There is a slight noise depending on the position of Aero fins and up and down movement of the Helmet, but it doesn't interfere with navigation and calls.
Anyway, the Parts themselves are assumed to be damaged? The Helmet will probably get damaged if it falls or hits the ground, so please be careful after mounting.
[How is it used?
Since it was effective when used on 7X, it was purchased separately and installed on VZ-RAM for use.
Was the one you received as per Image?
Yes
How was your experience with it?
Effective at speeds above 60 km/h.
[Points to note]
Since the diffuser cannot be opened and closed, it is recommended to close the diffuser beforehand when driving in the rain.
How did it compare to other products?
Other Brand Products have been available before they came out with ARAIHelmetOEM Parts, but you should not use anything other than OEM Parts because their safety cannot be guaranteed.
Other items that would be helpful
Installation Point or hang
→Read the Handling Instruction Manual thoroughly. If you have any questions, do not hesitate to contact ARAIHelmet. They will answer end-user's questions in detail.
Items to buy together
→Fiber cross/resin non-damaging parts cleaner
Opinions and requests to Manufacturer
→ Thank you for your reliable product and ARAIHelmet's craftsmanship.View Detail
I bought it because I thought it was not badly rated and would look good. The price is not cheap, and the packaging is well boxed and includes a detailed instruction manual.
The object is thin and light. Are they ready to be damaged immediately?
I'm not sure if it's a good idea or not, but it's a very expensive one, so I'll have to be careful not to break it.
It is easy to install and looks great.View Detail
It's thinner than I thought it would be.
Easy to install and good parenthesisView Detail
What made you decide to buy?
Arai:RX-7XHelmet Option for customization!
Now that I have the Mirror shield, B+COM, and RACINGSpoiler all in place, I am looking forward to touring with my son and his friends. However, lately the weather has been bad on the weekends when I can ride my motorcycle (tears).
How was your experience with it?
Developed to provide helmet stability and neck freedom for riders who concentrate on riding at ultra-high speeds. However, if you drive mainly on the circuit, you may be able to feel the super high speed range, but if you drive mainly on the street and occasionally at high speed, it's hard to feel it. However, although it was not mentioned in the manufacturer's description, the Parenthesis has become much, much, much better (laughs).
[How was the installation?
Since I don't have the courage to install the RACINGSpoiler in a single shot, I temporarily installed it on the Helmet and checked it before installation. To avoid damaging the graphics on the helmet, I used a mild kitchen detergent on the Dustcloth and wiped the area to be attached. Double-sided tape is attached to the back of the RACINGSpoiler as Quantity:Pair (for Left and Right) Before installing the RACINGSpoiler, remove about a third of the double-sided tape protection. The center of the RACINGSpoiler can be found by inserting the claw of the RACINGSpoiler into the exhaust port of the DIFAZER and the claw of the center under the Aero fin. (It is necessary to check the Large before installation. When the position of RACINGSpoiler is decided, peel off the remaining protective application and crimp it. (Make sure to check the Large before installation. (I did this in my own way, so it's for reference only.)
[Others]
When the RX-7XRACINGSpoiler is installed, it is more difficult to open and close the FAZER Exhaust Shutter than before. If you insert your index finger, you can open and close it. By the way, if you think that opening and closing is troublesome, it is better to choose either opening or closing before installing the RACINGSpoiler.
The RACINGSpoiler that I bought this time was Light smoke, so I installed it and finished. Light smoke does not come with RX-7XMark, so please do not misunderstand. Please do not misunderstand...View Detail
I like the round and sharp design of the ARAI helmet, but I bought this helmet because of its Race ish appearance and because I saw it being used in MotoGP and JSB.
It can be easily installed by anyone who is careful about distortions, as it is simply attached with double-sided tape.
If it is the only one installed, it will be difficult to open and close the rear duct.
Apart from that, it's a very cool Design.
Circuit also runs, but Haddill and I didn't experience the effects.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА