7,636.21 RUB
(12,500 иена)
6,364.32 RUB
(10,418 иена)
(17% OFF)
4 (8 Отзывы)
Excellent
It's a lot faster to work with.Purchased for a Caliper replacement.
I used to use a Syringe to bleed air and change fluids, but it was hard to use.
I found this one that a Motorcycle shop near me was using and bought it.
Like others have said in their imprints, the Tube is hard and it has Habit on it.
I bought about 2m of silicon tube at Home center and installed it.
I managed to do Fluid filling by myself, but I regret that I should have bought a check valve too.
I'm very happy with it, it's very convenient and the work is done quickly.
TIPS I always do about Breeder air intake in other imprints.
If you wrap more seal tape around the screw of the Breeder and stop it in the middle, it will not suck air.
When the work is finished and the Breeder is tightened, ignore the Seal tape and tighten it to the end.
After spraying water to clean, tear off the protruding part of the Seal tape at the end.
While the Bleeder Bolt is wrapped with Seal tape, another Bleeder Bolt can be inserted or
Don't worry about it, Fluid needs to be left flowing or something, but no particular problems so far.
Reviews For DAYTONA Тормоза воздуха Отвод инструмента (вакуумного типа) From Other Webike User
Poor
This set alone is not enoughI thought.
Even if applying a negative pressure with a bending angle Pump since it does not fit in the attached Breeder installation Parts
I will take in air from the gap between Breeder and Joint.
Since it can not be helped, purchase a small Silicon tube one size at home center
I used it for Joint between the attached Hose and Breeder.View Detail
Very Good
There is nothing different from Large.I will be looking forward to using this troublesome Fluid exchange. The amount of Fluid that I will eventually get out when I exchange it has also drastically decreased. It is the only disadvantage that Hose to use has a curvature hanging when stored and there is no stability feeling.View Detail
Average
It is easy to use.When I was doing Byte at the service station I was exchanging four wheels of Brake fluid so I was able to go to Smooth surprisingly. Product itself is cheesy, but easy to use. Since the Adapter could not be installed on the Front side, I connected the transparent Hose directly and exchanged the Fluid.
Although it is a replacement for the second year, because of deterioration, the color was brown and discolored.View Detail
Most Viewed Reviews Of DAYTONA Other Motorcycle Specialized Tools
Excellent
DAYTONA Fork Oil Level Adjustable ToolAbout quality and texture - Top quality. Durable syringe with plastic tubing and the etched markings on the metal pipe gives this tool a premium feel.About the feeling of use - In the past I used stripes of paper and zip ties to help me guage the oil height in the fork legs not that successfully but this tool just does the job so easy and perfectly measures the fork oil height to your selected measurement.Products to buy together - I'd recomment adding a plastic funnel and measuring beaker to your order with this tool as these 3 tools together will make fork oil servicing a breeze.Difficulty of installation - The tool is very easy to fit to the fork leg and use by simply adjusting the metal pipe in its retaining ring and pulling out the excess fork oil using the included syringe.Cost performance and comparison with other products - There are many options of this tool here on Webike and the one from Daytona is on the low end of the price scale but does the job well and so does all the other tools I use from Daytona Garage.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - If you want the best of the best fork oil level adjustable tool Daytona also offer another version with a higher quality airtight syringe for 3 times this price.View Detail
Very Good
Hmmm. A little difficult to use…Purchased mainly to remove the Spring used for the Joint in the Exhaust System.
I remove it every time I change the Oil, so I think it is not easy to use, although it is used infrequently.
The long length of the handle and Hook makes it difficult to make fine adjustments.
It seems durable, so I will use it for a while.View Detail
Average
ForkOH essentialsI used it on the Front forkOH of my Triumph STREET TRIPLE that I use in the Main.
With this, the oil level can be accurately and quickly obtained, and the Fork's OH work can be done quickly.
If you want to do your own OH on Fork, you'll want to buy one of these!View Detail
Very Good
A necessity for accurate and safe workThis time I used it for a W800 Fork oil change job, and there was nothing to worry about, and the fluid level position was accurate to the scale Quantity.:Set, and just suck it up with Syringe.
Before, it was difficult to check the liquid level using Scaleetc., and it took a lot of time and effort to check the liquid level position again and again.
I have used it about 4 times for oil change and overhaul since I purchased it, and the work is always completed in one shot very smoothly because the fluid level can be adjusted easily.
When using the Syringe to suck out the oil, it is important to do so carefully, keeping close contact with the top surface of the Fork.
Fork oil replacement is safe and reliable with a vertical fixture and this.
If I may say so, the scale may be a little hard to see. I check it many times before pulling it out.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА