11,240.5 RUB
(18,400 иена)
5 (14 Отзывы)
Very Good
RSV4OEM and same etc. products[How is it used?
The RSV4 OEM rear caliper locked up when I was running Circuit and it was smoking up. Also, the brake discs were burned to a blue color.
My motivation for purchasing this bike was not to replace parts for the Race, but to replace the entire Caliper in order to run comfortably.
By the way, I think the OEM Equivalent Product of brembo was attached to the pad that was attached to the OEM Caliper, but the back plate and the METAL surface were separated by heat because it was thin.
The Brake Disc was reused as it was because it seemed to have no bends.
Since it is ST1000Class, it can only be used with Caliper, which is the same as OEM Product, we choose this one.
Was the one you received as per Image?
It's almost the same as OEM! Or maybe the part number is the same?
It also comes with Brake Pads, which I think is a great deal.
Was the installation difficult?
It wasn't so difficult because it was an OEM replacement, but the new pad pin was pretty tight and a little large to remove.
How was your experience with it?
It no longer locks up, so it may be that the OEM Caliper was still at the end of its life.
Either the Seal was expanding due to heat or the Piston was distorted...
The new one works well and I'm happy to say that the Pad is now new.
I also heard that the OEM pad pins were not very good so I bought and installed them separately.
[Included Parts:were they on?
Brake Pads
[Was there anything that disappointed you?
Is it that the air vent is Large strange?
I had to deal with it while removing the Caliper, so air bleeding was quite troublesome.
By the way, the screw diameter of Breeder and Banjo is the same on brembo, so I transplanted Breeder to the other side and used it. (OEM is also this shape)
Reviews For brembo Задний Тормозной суппорт P2 34 84mm Gold From Other Webike User
Excellent
Brembo Caliperระบบเบรคระดับโลก จาก Brembo ไม่ต้องอธิบายให้วุ่นวายมาก คุณก็รู้อยู่แล้วว่าทั้งด้านประสิทธิภาพ และความสวยงาม และความปราณีตของแบรนด์ Brembo สุดยอดขนาดไหน !!!Brembo world class brakes do not have to be very busy. You already know that in terms of performance. And beauty And refinementBrand new Brembo brand !!!(translated by Google Translator)View Detail
Excellent
be effectiveI used to use the old Crab, but bought it because of the Spec. change!
Works well, Control is good!
The calisthenics support is Active because the whole zrx1100Swing is appropriated.View Detail
Excellent
It works great !!I changed the Front first and thought that Rear would change it later - - - Sale was held so I bought it immediately (sweat) Simultaneously with the purchase of Caliper, we ordered M8 Stainless Taper Cap Bolt at the same time and exchanged it before installation. After that Stainless SteelBreeder - I upgraded version up by exchanging Stainless Brake Pad Pin M-Type additionally (Lol) The installation model will be Gromm.
Well, it is an evaluation that exchanged Rear caliper - - - It works well enough to think that OEMRear caliper did not count on how much, and only the rear. It will be stopped at! After exchanging for brembo back and forth the braking distance will be shorter than OEM. Just when it rains, hang Brake with the same sense as OEM - - - It may slip. Master diameter is Front - Both of Rear 1 / 2 By the way, I have to tighten OEMBreeder to Well - - - Fluid will blur when you multiply Brake (sweat) Those who are exchanged by yourself, please finalize the final confirmation ~
View Detail
Excellent
Is goodAs with Front it is purchased along with 12-inches.
Because I gave it to Front, Rear is also brembo? ( 'ω' ) ?
Both effectiveness and controllability are outstanding.View Detail
Most Viewed Reviews Of brembo Brake Calipers
Excellent
The P2 rear brake caliper offers outstanding braking performanceAbout quality and texture - The P2 rear brake caliper from Brembo is made from cast aluminium with a black anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect.About the feeling of use - The P2 rear brake caliper offers outstanding braking performance with it's larger piston diameter and higher quality brake pads, while the look is also improved with the subtle black colour caliper.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P2 rear brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a rear brake bracket to allow for the mounting of the rear brake caliper.Difficulty of installation - The installation of the P2 rear brake caliper is an intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude, knowledge on disassembling the Honda Grom and the use of basic hand tools is what is required to secure the P2 rear brake caliper to the bracket and bleed the brake caliper.Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P2 rear brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P2 rear brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs with their variety, availability and pricing.View Detail
Very Good
Great product, great upgradeMalfunctioned stock caliper on a so this was a better option to go than OEM.I didn't expect much when I bought it.First try was in the long ride and I wouldn't spend this much money for the extra performance if I didn't have to.That was a game changer, especially on steep downhills.Brake precision and overall performance is far better. Braking at speeds above 100km\h made a big difference.braking distance is now noticeably shorter.Worth every penny. Also looks better on the bike than I expected.View Detail
Excellent
Is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the GromAbout quality and texture - The P4 right brake caliper from Brembo is made from cast aluminium with a gold anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect.About the feeling of use - The P4 right brake caliper is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the Grom with it's gold finish that matches the forks so well, not to mention the improved feel and braking performance with it's larger diameter pistons and higher quality brake pads.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P4 right brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a front brake bracket to allow for the meshing together of the Brembo brake caliper and the Honda lower fork leg.Difficulty of installation - The installation of the P4 right brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the P4 right brake caliper to the bracket and bleed the brake caliper.Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P4 right brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P4 right brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing performance products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very limited.View Detail
Excellent
Offers a stunning new look over the factory red brake caliper while also improving braking performanceAbout quality and texture - The P2 rear brake caliper from Brembo is made from cast aluminium with a gold painted surface finish and includes brake pads, the quality from the overall fit and finish is perfect.About the feeling of use - The P2 rear brake caliper offers a stunning new look over the factory red brake caliper while also improving braking performance with it's larger piston diameter and higher quality brake pads.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P2 rear brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a rear braided brake hose.Difficulty of installation - The installation of the P2 rear brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude, knowledge on disassembling the Honda Grom and the use of basic hand tools is what is required to secure the P2 rear brake caliper to the bracket and bleed the brake caliper.Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P2 rear brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P2 rear brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing performance products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic.View Detail
Excellent
perfectinstalled this brembo on w650, because stock ones are not quite good for me.it's not bolt-on for w650, you need to customize bracket and wheel space bushings. also you need to improve the main cylinder and brake diskView Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА