Works well for DIY

Had this tool for more than 3 years,so have decent experience using it. And is really does work.It's important to follow the instructions to the letter, but it will remove screws that would otherwise have to be drilled out. Very high quality and cleverly thought out. Would not be without it in my toolkit.View Detail

[How is it used?
I am restoring a YAMAHA TZr50R and the screws are sticking everywhere. In addition, many screws of this age use pot screws, which are licked at a high frequency. Therefore, I used this product from Neji-saurus, which is said to be effective for licked Screws. I chose this product because I wanted to do the maintenance by hand as much as possible because it is possible to do it at night and I have to be careful in the neighborhood, although using electric tools is most effective.

Was the one you received as per Image?
It was just like the Image. It looks like a Plus, but it has a return on both ends.
Another point is that it can be attached to power tools.

How was your experience with it?
The product is inserted into the head of the screw that has been licked or is about to be licked, and then turned around. After that, put your weight on it and turn it as hard as you can, and the Screw will turn with a cracking sound. This sound is very pleasurable. I use this from the beginning for screws that have never been turned because it does not give that much damage even if you use it on a clean screw head.

[Points to note]
Power of the user is indispensable. It is recommended to put on non-slip gloves etc. when you use it.
If the screw does not come off even with this, use DBZ-52, and if that does not work, give up and use an electric tool.

How did it compare to other products?
In the end, power tools are best for licking Screw.
It is quite effective for Screws that are just a bit stiff. The price is not that expensive, so it is very useful to have one.View Detail

[How is it used?
I am restoring a YAMAHA TZr50R and the screws are sticking everywhere. In addition, many screws of this age use pot screws, which are licked at a high frequency. Therefore, I used this product from Neji-saurus, which is said to be effective for licked Screws. I chose this product because I wanted to do the maintenance by hand as much as possible because it is possible to do it at night and I have to be careful in the neighborhood, although using electric tools is most effective.

Was the one you received as per Image?
It was just like the Image. It looks like Minus, but it has a return on both ends.

How was your experience with it?
Before using this product, it is necessary to make a Screw head with the product DBZ-51. If that does not work, use the DBZ-52 to hammer in the screw head before turning it. In this case, you need to drive it in quite deep to get it to turn.

[Points to note]
Power of the user is indispensable. It is recommended to put on non-slip gloves etc. when you use it.
Screws that don't come off even with this guy should be given up and power tools should be used.

How did it compare to other products?
In the end, power tools are best for licking Screw.
It is quite effective for Screws that are just a bit stiff. The price is not that expensive, so it is very useful to have one.View Detail

[How is it used?
Used to lick Screw loose.

Was the one you received as per Image?
As per Image.

How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.

It is also useful for DIY Screw removal.

[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail

It would be useful to use it to open a plate Screw that does not fit in a Neji-saurus.View Detail

I was surprised at the lightness of the Off-Road Helmet as soon as I held it, it is so light that I could not believe it is an Off-Road Helmet.
The design is cool and comfortable to wear. I highly recommend this product because of its good cost performance.View Detail

It takes only a few minutes to warm up after turning on the power. Thanks to the electric heating system in the fingertips as well, there is no coldness at the fingertips and they are comfortable.
The size is different from the usual size and feels large, so we recommend that you try it on before purchasing.View Detail

It was introduced as an intake system Custom after the exhaust system was replaced.
I feel that the replacement together with Funnel and IntakeDuct has increased the intake volume and slightly increased the power extension from high RPM.
However, it is difficult to feel such a drastic change at TouringLevel, so I would not recommend it to Touring Mainers considering the cost performance.View Detail

Replaced at the same time as PowerIntakeDuct.
It is simple, but it has a manufacturer's logo and is visually appealing and has a dress-up effect.
Since the OEM cannot be diverted as is, I feel that it should have been included with the Duct anyway.View Detail

The intake system was installed as a custom system for the purpose of power up along with the replacement of the exhaust system.
The intake port is larger than the OEM intake port, and I think the intake volume is increased, but to be honest, I couldn't really feel the effect at TouringLevel.View Detail