Installed the fitting in September 2015 and it has worked great until a few days ago. I noticed a little oil leaking around the fitting. I torqued the fitting to 31ft lbs and it snapped off. Please see picture. I wish the fitting was made of steel and not brass.
Fits: KAWASAKI ZXR400 89-01 L [Installation position:Right crankcase lower side]., KAWASAKI ZXR400 89-01 M [Installation position:Right crankcase lower side]., KAWASAKI ZXR400 89-01 R [Mounting position:Lower side of right crankcase]., KAWASAKI ZZR1100/ZX-11 90-97 (C) [Installation position:Left pulsar cover lower side]., KAWASAKI ZZR1100/ZX-11 90-97 (D) [Installation position:Left pulsar cover lower side].
Gasket washer, with an inner diameter of 18mm, outer diameter of 25mm, and thickness of 2mm
Inventory wiped out at 6 nearby supply stores?
AutoBacks as I recall, there was no Washer itself in the store, so I asked and Pit brought me one with an inner diameter of 18mm, outer diameter of 25mm and thickness of 1.5mm ^_^.
AutoBacks indeed?
When replacing the oil, it might be better to remove only the Temperature Sensor.View Detail
Fits: KAWASAKI ZXR400 89-01 L [Installation position:Right crankcase lower side]., KAWASAKI ZXR400 89-01 M [Installation position:Right crankcase lower side]., KAWASAKI ZXR400 89-01 R [Mounting position:Lower side of right crankcase]., KAWASAKI ZZR1100/ZX-11 90-97 (C) [Installation position:Left pulsar cover lower side]., KAWASAKI ZZR1100/ZX-11 90-97 (D) [Installation position:Left pulsar cover lower side].
There is no stock of this Drain Washer with 18mm inner diameter, 25mm outer diameter, and 2.0mm thickness, and all 5 nearby motorcycle supply stores were completely wiped out.
AutoBacks, as I recall, were not in the store, so I asked them and they brought me one from Bit's with an 18mm inner diameter, 25mm outer diameter and 1.5mm thickness! ( ^ω^ )
AutoBacks indeed!View Detail
Fits: KAWASAKI ZXR400 89-01 L [Installation position:Right crankcase lower side]., KAWASAKI ZXR400 89-01 M [Installation position:Right crankcase lower side]., KAWASAKI ZXR400 89-01 R [Mounting position:Lower side of right crankcase]., KAWASAKI ZZR1100/ZX-11 90-97 (C) [Installation position:Left pulsar cover lower side]., KAWASAKI ZZR1100/ZX-11 90-97 (D) [Installation position:Left pulsar cover lower side].
Personally I think that it may be cheaper
Body buying and Fitting will be a part that must be bought absolutely because it will be a part that can be sold at a high price this time DAYTONA, but each Manufacturer thinks such a feeling is only yourself?View Detail
Fits: KAWASAKI ZXR400 89-01 L [Installation position:Right crankcase lower side]., KAWASAKI ZXR400 89-01 M [Installation position:Right crankcase lower side]., KAWASAKI ZXR400 89-01 R [Mounting position:Lower side of right crankcase]., KAWASAKI ZZR1100/ZX-11 90-97 (C) [Installation position:Left pulsar cover lower side]., KAWASAKI ZZR1100/ZX-11 90-97 (D) [Installation position:Left pulsar cover lower side].
DAYTONA I bought it with AQUAPROVA HG Thermometer and Bracket and Set.
It was a special item so I could install it with confidence.View Detail
Fits: KAWASAKI ZXR400 89-01 L [Installation position:Right crankcase lower side]., KAWASAKI ZXR400 89-01 M [Installation position:Right crankcase lower side]., KAWASAKI ZXR400 89-01 R [Mounting position:Lower side of right crankcase]., KAWASAKI ZZR1100/ZX-11 90-97 (C) [Installation position:Left pulsar cover lower side]., KAWASAKI ZZR1100/ZX-11 90-97 (D) [Installation position:Left pulsar cover lower side].
Washer is attached, it is thought that it was good to have wound Coking Tape ? around the thread pa
A Cost performance also thinks that it is good and the place where the Lineup of various objects for vehicle types is carried out is charm.Although the
Washer is attached, it is thought that it was good to have wound Coking Tape ? around the thread part in addition.(Since the Tape was wound around the Sensor)View Detail
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА