[Size]
Width: 690mm
Height: 59mm
Depth (Opening): 150mm
Outer Diameter: Φ22.2
Inner Diameter: 14mm
Standing Angle: 72-degrees
Aperture Angle: 32-degrees
Compared measurement to the STD Parts: 7mm Up/7mm Back
[Weight] 570g
[Specification]
Hole Processing: without Switch Hole Processing
Clutch Cable (Hose) Correspondence: Available
Throttle Cable Correspondence: Available
Brake Hose Correspondence: Available
[Country of Origin] JAPAN
It is specially designed for a comfortable position by setting it approximately 10mm forward than the STD parts.
It is a design that the grip part moved in parallel based on the STD handlebar shape. It can be form in a good riding position without compromising the image since the angle is the same as STD parts.
•EFFEX Vehicle Exclusive Original Design Handlebar
It is set to a large global model such as Adventure and Cruiser model. It is an original designed handlebar that achieves good riding position within the reach of OEM hoses/wires while which are based on STD design.
•It does not require cable replacement.
There is no doubt that "I do not know if I cannot attach ..." since it is designed exclusively for motorcycle model.
*There are cases that it may require replacement of the cable as much as possible depending on the type of motorcycle.
*For the "High Type" handlebar, there are cases that it requires cable replacement.
•It has switch hole drilled.
It does not interfere with the operation or extra expense such as position determination and tool preparation, etc.
*There are cases that it does not have switch hole depending on the vehicle.
•It shifts the lever holder from left and right.
It is designed to be approximately 5mm longer in the mounting line.
It is possible to fine-tune the grip position of the lever.
[Vehicle Exclusive Bolt-on Handlebar]
It is a design that the grip part moved in parallel based on the STD handlebar shape.
It can be form in a good riding position without compromising the image since the angle is the same as STD parts.
*The bar end is not included in the product.
*It is impossible to use the STD. The handlebar weight is usable for each separate type (for aluminum handlebar/steel handlebar).
*"Compared measurement to the STD Parts Approximately 10mm" is a numerical value of the STD, and it is different for each vehicle type.
*The replacement for brake hose and cable are not necessary.
*It has not been processed in the switch hole on the handlebar.
*The hole drilling is necessary for installation.
*It is impossible to use the OEM Handlebar End.
*It may differ from the overall width of the vehicle verification description depending on the vehicle type.
? 
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА