I was looking for a blinker for my ZX-10R that doesn't have too much of a blinker body.The famous one is Kellerman, but that one is too expensive.Moreover, the vehicle itself is a Design with an Edge, but the round Design does not suit it.That's why I chose the Nano this time.As for the feeling of useYou're crazy, right?It's so bright that you won't miss the Blinker flashing day or night.It is so powerful that you cannot see anything in front of you when you look at it from the car because the mounting position was set a little high. (I want to fix this before I get shoved in the back)In addition, since the body shape is small and the part in contact with the vehicle is a surface, the installation surface matches perfectly and the sense of unity is enhanced.If you're selfish enough to want to get rid of Blinker's presence but don't want to get caught, this is for you.

Blinker Lamp Nano Single LED KIJIMA

Подходит для:

Others 12V DC vehicles

Aftermarket parts addition required for ...

Сообщение Jan 21, 2021

Aftermarket parts addition required for CBR250RR M...

CBR250RR MC51… Basically, only the L-brake can be installed, but it is very unstable and it is dangerous to ride with the maintenanceSTAND on, so I chose the V-brake after changing the spec. However, if you want to install the V-brake on MC51, you need to add Aftermarket parts.

It's like the car is SMART!

Сообщение Jan 18, 2021

I bought this product because I didn't like the design and I didn't want it to get caught on something and break because it sticks out to the side.It is a little difficult to install because it requires disassembly of the Upper Cowl, but basically, if you put the wiring through the same place as OEM, it will fit together well.Visibility is fine and I'm very happy with the Refreshing and Styling.

LED Front Turn Signal + Radiator Shroud Kit ACTIVE

SUZUKI KATANA 19

OEM function as it is! If you are intere...

Сообщение Jan 16, 2021

OEM function as it is! If you are interested in th...

I bought this to convert my '14 MC41 CBR250R late model Blinker to LED.[Contents] is very simple with Grounding Wire and Tie Wrap because it is almost a Couplet-on.The finish of the body is very good and there is no worry about Shortetc. due to water immersion.The grounding wire is connected to the bullet terminal, which is good for easy wiring.Attached is a picture of my participation in the Wiring of Earth to MC41.The instruction manual is very helpful and if you have a kill to remove the cowl, installation is no problem at all.The blinker position function of the OEM works fine, and the blinking is about the same as the OEM or a little faster, so no problem.Here's what I'm not happy about.The body is larger than OEM Relay, so you have to force the OEM Mount rubber to expand and fix the body, which is not SMART.Because the connector is not coming out from the body directly like OEM, there is a wiring between the body and the wiring. (I think it is better to cover the mouth part of Rubber part of ConnectorCover with Vinyl Tape etc.)The most important thing is the price. I personally think that this price is too much for Relay, which does not have flas...Read more

Wide Watt Turn Signal Position Relay POSH

HONDA XR250 (MD30)
HONDA CB400SS
HONDA CBR250R 11-14

The wild thing disappears from sight.

I was concerned that the OEM Product was too big, so I replaced it.The work takes less than an hour, so even beginners can do it as long as they have the tools.[Things that bothered me about the work1 M8Nut is 12mm, not 132 Rear's Harness is too long3 Reinstalling the RubberBushing in the Rear Fender vents is difficult because it's hard to get your fingers in, that's the only difficulty4 The thing of the Wiring bare that was mentioned in other people's impressions, BlackTube is not shrinkage, it is made by Vinyl. "ShoeDoctor. It is better to fix it beforehand with Rubber groove of etc.It's not sequential, but at this price, Quantity:If the Set is aligned. "Yes" It is

LED Blinker Kit TRL 2 Type KIJIMA

SUZUKI V-STROM650 17-20
SUZUKI V-STROM1000
SUZUKI SV650 16-20 ABS
SUZUKI GSX-S1000

Широкоформатное реле положения индикатора ватт тип 2

Описание товара

Недавно просмотренные продукты

Оценки & Отзывы

It's small, but the light intensity is m...

Aftermarket parts addition required for ...

It's like the car is SMART!

OEM function as it is! If you are intere...

The wild thing disappears from sight.