[Размер]
・Передний обод размер:3.50-17
・Задний размер обода:6.00-17
[Материал / Материал]
· Алюминиевый для ковки (AL) AA6009 / Т1
· Серия 7075 (Ultra Duralumin)
[Отделочные] Высокое качество уретановая краска
[Вес]
・Спереди:3.72 кг (ОЕМ:4.34 кг)
・Задний:5.95 кг (ОЕМ:6.99 кг)
[Адаптивный размер звездочки] A525.43
[Стандартный размер колеса (ОЕМ)] #525-43
[Рекомендуемый размер звездочки (Marchesini в)] #525-43
[Способ изготовления]
· Процесс вковки (Поковка)
· Горячая ковка
· Тип выделенного золота (Эксклюзивная пресс-форма)
· Многонаправленная одновременная печать (Полная формованная ковка)
· 15,000 тонн поддельных пресс
· CNC (Компьютерное управление) Финишная отделка
[Включенные детали:] Клапан AluminumAir (Л(90 градусов) Спец.)
[Спец.]
・Способен использовать для гонки.
・Новые Кольца-Демпферной Системы, Принятые
・JWL стандартный соответствие
[Страна происхождения] Италия (СДЕЛАНО В ИТАЛИИ)
[Производитель производства]
Brembo SpA
Via Brembo.25 24035 CURNO (BG) Италия
* Специальная звездочка продается отдельно.
* Цвет колес может отличаться от фактического цвета из-за съемки и отображения связей между экраном.
* Поскольку изображение представляет собой изображение в форме спицы, форма ступицы может варьироваться в зависимости от транспортного средства.
* Поскольку оправа адаптирована к цель использования, содержимое конструкция немного отличается по ул./гонки.
[Дисплей колеса вес (условия измерения)]
* Вес отображается колеса в комплекте Весов подходящих частей, таких как подшипники, боковые обтекатели и колеса, держатели "колеса в сборе (сборка) веса".
* Оригинальные колесные диски Marchesini в вашем и вес измерить исходя из тех же составных частей одни колеса за исключением частей, не может сравниться должным образом из-за разницы в структуре.
* Для того, чтобы точно выполнять сравнение веса с подлинными ношение колеса, измерение веса является единой на следующих условиях.
* [ПЕРЕДНЕЕ КОЛЕСО] = Снять колесо с машины тела, измерить вес шины и диска Ротора удалены
* [ЗАДНЕЕ КОЛЕСО] = Снять колеса с кузовом автомобиля и измерить вес шины с диском ротора и колеса сняли
* "Искреннее отношение" и является подлинной (OEM) Это соотношение снижение веса при сравнении веса колес Marchesini в при тех же условиях измерения веса колеса . (Чем больше минус номер, тем светлее оригинальные колеса будет.)
[О звездочках]
* При использовании на улице, если не произойдет значительного изменения размера шин должны быть объединены в колесо обмен "подлинная стандартный монтажный размер звездочка" принцип отбора.
* Даже когда задние изменений размера шин из-за замены колеса, следующее изменение рассматривается как никаких изменений в диаметре шин.
* 170/60 ZR В 17 ⇔ 180/55 ZR В 17 ⇔ 190/50 ZR В 17
* Рекомендуемый размер колеса отличается от подлинной стандартный монтажный размер, но есть некоторые модели, но тип, соответствующий этой машины является относительно большое изменение в диаметре шин из-за колес и шин обмена.
[Size]
・Front rim size: 3. 50-17
・Rear rim size: 6.00-17
[Material]
・Aluminum for forging (Al) AA6009 / T1
・A7075 series (Super duralumin)
[Finish] High quality urethane paint
[Weight]
・Front: 3.72kg (Stock: 4.34kg)
・Rear: 5.95kg (Stock: 6.99kg)
[Applicable sprocket size] A525.43
[Standard sprocket size (OEM)] #525-43
[Recommended sprocket size (marchesini)] #525-43
[manufacturing process]
・Forging method (Forged)
・Hot forging
・Exclusive Mold
・Multi-directional simultaneous press forging (Total Formed Forging System)
・15,000-ton class forging press
・Final shape cutting and finishing by CNC (computer controlled)
[Components] Aluminum air valve (L (90 degree) specification)
[Specification]
・It can be used for racing
・New ring type damper system adopted
JWL standard compliant product
[Country of Origin] Italy (MADE IN ITALY)
[Manufacturers]
Brembo S.p.A
Via Brembo.25 24035 CURNO (BG) Italy
*Special sprockets are sold separately.
*The color of the wheel may look different from the actual color due to the shooting and display screen.
*The image shows the shape of the spokes, and the shape of the hub may vary depending on the vehicle.
*The design of the rim is slightly different for street / racing due to the adaptation to the purpose of use.
[Display of wheel weight (measurement conditions)]
*The wheel weight displayed is the "wheel assembly weight" which includes the weight of fitting parts such as bearings, side collars and sprocket holders.
*Weights are measured on the assumption that the same components are used for both the stock wheel and the Marchesini wheel - the weight of the wheel alone, without the components, does not allow a proper comparison due to the differences in construction.
*In order to accurately compare the weight of the wheel with that of the stock-installed wheel, the weight measurement is standardized to the following conditions.
*[FRONT WHEEL] =Measurement of the weight with the wheel removed from the bike and the tire and disc rotor removed
*[REAR WHEEL] =Weight with the wheel removed from the bike and the tire, disc rotor and sprocket removed
*"OEM ratio" is the ratio of weight reduction possible when comparing the weight of a Marchesini wheel to the weight of a stock (OEM) wheel under the same measurement conditions.(The larger the minus value, the lighter the wheel is compared to the stock wheel.)
[About the sprockets]
*For street use, unless there is a significant change in the tire size to be combined with the wheel change, the "stock standard size sprocket" should be selected as a general rule.
*Even if the rear tire size is changed by changing the wheel, the next change is considered as no change in tire diameter.
*170/60ZR17 ⇔ 180/55ZR17 ⇔ 190/50ZR17
*The recommended sprocket size is different from the stock standard size in some models, but these models have a relatively large change in tire diameter by changing wheels and tires.
[About Metal series (gold anodized finish) products]
Anodized aluminum products are finished by coloring with anodizing.
Please understand that anodizing has the following characteristics and weak points.
●Machining marks caused by cutting
The wheel is produced by machining.
Since products as large as wheels are processed and finished by "total machining, " there will be fine "cutting marks" on the products.
We evaluate such "cutting marks" in terms of finishing, considering the wheel as a functional part.
●Anodized aluminum treatment
Anodizing is applied as a finishing of the wheels.
Anodizing is a process that creates an anodic oxide film on the aluminum surface, which has the advantage of improving corrosion and corrosion resistance, but because it is a process that applies a film to the surface of the product, it cannot hide the "cutting marks" described in the previous section, unlike a painted finish.
Also, unlike a painted finish, the color of the product may vary in shade and unevenness.
●Product quality criteria
Anodized aluminum products are delivered after being evaluated in consideration of the anodized aluminum products characteristics.
The products delivered are basically in the range of good products.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.