Количество]1
[Размер]
Диаметр винта 10 мм
19 мм
Дюймовый ключ размером 16 мм
Форма]Тип разъединения терминала
совместимый с NGK]CR8E, CR9E, CR10E, CPR8EA-9, CPR9EA-9, CPR10EA-9, CR8EK, CR9EK, CR10EK, CR8EIX, CR9EIX
*Изображение приведено только для справки. Этот продукт продается единицей одного.
*Автомобили с тюнингованной системой зажигания - да
*Стандартная система зажигания - Да
*Транспортные средства с полным транзисторным зажиганием - да
*CDI автомобили с зажиганием - да
*4-тактные автомобили - да
*2-х тактные транспортные средства - только использование схемы
*Тип резистора (с резистором)
*Размер дюбельного ключа 16 мм, который используется для дюбеля С.
*Так как клемма является отдельным типом, она совместима с любой формой крышки штекера. Клеммы слегка завинчены во время транспортировки, поэтому, пожалуйста, проверьте герметичность клемм во время установки.
*Для получения дополнительной информации о совместимости обратитесь к приведенному ниже списку разъёмов NGK.
*Все модели с диаметром резьбы 14 мм и длиной резьбы 19 мм являются взаимозаменяемыми.
AR12ZS (NGK "C plug" size)
[Quantity] 1
[Size]
・Screw diameter 10mm
・Reach 19mm
・Plug wrench size 16mm
[Shape] Terminal separation type
[NGK compatible] CPR8EA-9, CPR9EA-9, CPR10EA-9, CR8EIX, CR9EIX, SIMR8A9
*Heat value correspondence is from No. 8 to No. 10.
*This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Images are for reference only.The product is sold by the unit of one bottle.
*Ignition system tuned bikes - available.
*Ignition system stock bikes - available but limited types.
*Fully transistor ignition bikes - available.
*CDI ignition bikes - available.
*4-stroke bikes - available.
*2-stroke bikes - track use only.
*Resistor type (with resistor)
*Plug wrench size is 16mm which is used for C plug etc.
*The terminal is separable, so it is compatible with any plug cap shape.When the unit is shipped, it is only lightly screwed in, so check the tightness of the terminal when installing
*For other compatibility, refer to the NGK plug list below.All the mounting threads with a diameter of 10mm and a length of 19mm have compatibility.
*The tightening torque is 0.9kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.