Щитовая линза с светочувствительной функцией, которая изменяет интенсивность линзы в зависимости от интенсивности солнечного света.
Ламинированная структура производится путем склеивания, а разница температур внутри и снаружи шлема выравнивается, чтобы предотвратить запотевание вида сквозь щит..
Также доступна обработка против тумана..
От туров до гонок, от любителей до топовых гонщиков, испытайте на себе самый мощный объектив, которому безмерно доверяли..
Простая установка, просто приклейте на заднюю часть щита..
[руководство по эксплуатации PROGRIP 3000LS LENS]
Эта инновационная линза, после крепления к щиту шлема, повышает общую эффективность щита в различных условиях тумана и солнечного света..
Перед креплением 3000LS к экрану внимательно прочтите следующие инструкции..
Подготовка
Пожалуйста, выберите прохладное, сухое и защищенное от пыли место для установки..
При опущенном щите шлема наложить маскировочную ленту вдоль отверстия щита (см. рисунок на упаковке)..
При снятии экрана указывается точное место установки объектива 3000LS..
Снимите щит со шлема.
Очистите и высушите экран в соответствии с инструкциями производителя..
Пожалуйста, убедитесь, что на щите нет отпечатков пальцев, масляных пятен или капель воды..
Для очистки щитов с силиконовой обработкой поверхности мы рекомендуем использовать пластиковый очиститель на нефтяной основе (без силикатов) для улучшения адгезии 3000LS..
Пожалуйста, установите объектив 3000LS после очистки и сушки экрана..
Установка
1. Снимите защитную пленку с обеих сторон объектива..
Пожалуйста, будьте осторожны, чтобы не получить отпечатки пальцев или пятна на объективе..
Снимите защитную пленку с клейких прокладок с обеих сторон и вокруг объектива..
2. Держите оба конца линзы и медленно изгибайте линзу в U-образную форму, при этом сторона с двусторонней лентой будет обращена внутрь щита.. (см. диаграмму на упаковке)
3. После того, как объектив закреплен, убедитесь, что он установлен в правильном месте и аккуратно надавите на него по всему объективу..
В случае смещения слегка приподнимите смещенную область и снова слегка надавите..
4. После установки линзы в правильное положение клейкая прокладка теперь прочно прикрепляется, прилагая сильное усилие по всей поверхности линзы..
Пожалуйста, дайте 24 часа до повторного прикрепления щита к шлему, чтобы объектив приклеился к щиту более плотно..
5. Когда щит прикреплен к шлему, объектив 3000LS может создавать помехи части оплетки в зависимости от положения основания щита шлема..
Пожалуйста, проверьте, можно ли открыть и закрыть экран без проблем при регулировке основания экрана, чтобы избежать помех..
принадлежность
Остаточная грязь на объективе может быть удалена с помощью стеклоочистителя.
Не используйте абразивные или коррозийные чистящие средства..
Shield lens with light sensitive function that changes the intensity of the lens depending on the intensity of sunlight.
A laminated structure is created by attaching this product to a helmet to equalize temperature difference between inside and outside of a helmet and prevent fogging of a view through a shield.
Also anti-fog treated.
From touring to racing, from amateurs to top riders, experience the most powerful lens that is trusted by all.
Easy to install, just stick it on the back of the shield.
[instruction manual for PROGRIP 3000LS LENS]
This innovative lens, after being attached to the shield of a helmet, enhances the total performance of the shield in various conditions with different fog and sunshine conditions.
Please read the following instructions carefully before attaching the 3000LS to the shield.
■Preparation
Please choose a cool, dry and dust-free place for installation.
With the shield of the helmet lowered, apply the masking tape along the opening of the shield (see the figure on the package).
When the shield is removed, the exact mounting location of the 3000LS lens will be noted.
Remove the shield from the helmet.
Clean and dry the shield according to the manufacturer's instructions.
Please make sure that there are no fingerprints, oil stains or water droplets on the shield.
For cleaning shields with a silicone surface treatment, we recommend a petroleum-based plastic cleaner (without silicates) to improve the adhesion of 3000LS.
Please install the 3000LS lens after cleaning and drying the shield.
■Installation
1. Remove the protection film from both sides of the lens.
Be careful not to get fingerprints or smudges on the lens.
Remove the protection film from the adhesive gaskets on the sides and around the lens.
2. Hold both ends of the lens and slowly curve the lens into a U-shape with the side with the double-sided tape facing the inside of the shield.(See diagram on package)
3. Once the lens is attached, make sure it is set in the correct place, and gently apply force to the entire area around the lens.
If the sticking position has shifted, gently lift up the misaligned position and gently apply force again.
4. After the lens has been placed in the correct position, firmly apply pressure to the entire area around the lens to ensure that the adhesive gasket is firmly attached.
Please allow 24 hours before attaching the shield to the helmet again in order to make the lens stick to the shield more firmly.
5. 3000LS lens may interfere with a braid depending on a position of a shield base of a helmet when a shield is attached to a helmet.
Please check if you can open and close the shield without any problem while adjusting the shield base to avoid interference.
■Maintenance
Residual dirt on the lens can be removed by using a glass cleaning agent.
Do not use abrasives or corrosive cleaning agents.