*Axis 90 ранний тип 3VR1 не может быть установлен, но может быть установлен с муфтой KN проекта 3 шт.
*RS90 Target 90 не может быть установлена, но может быть установлена с помощью нашей 3-х штучной муфты.
*Не устанавливайте на два автомобиля сцепления.
*В зависимости от типа сцепления, которое будет использоваться вместе, внешнее сцепление и сцепление могут мешать друг другу. В этом случае необходимо сместить сцепление снаружи с помощью шайбы. Если помехи незначительны, можно использовать сцепление, компенсируя его шайбой. 03-JW/05-JW]
*Если наружная крышка сцепления влияет на внешнюю крышку картера, необходимо изменить сторону крышки картера.
*Даже в случае с настоящим сцеплением, есть случаи, когда его нельзя использовать в зависимости от модели автомобиля. Если сцепление не может быть установлено, мы обещаем вернуть изделие перед использованием, но мы не можем отправить альтернативное изделие.
*AXIS 90 early type 3VR1 cannot be installed, but can be installed by using KN Planning 3-piece outer.
*RS90 Target 90 cannot be installed but can be installed with our 3-piece clutch.
*Do not install on two clutch vehicles.
*The clutch outer and clutch may interfere with each other depending on the type of clutch to be used together.In this case, the clutch must be offset to the outside using a washer.If there is only a slight interference, it is possible to use it by offsetting with washers.[03-JW / 05-JW]
*If the clutch outer interferes with the outer crankcase cover, modification of the case cover side is required.
*Even in the case of a stock clutch, there are cases where it cannot be used depending on the model.If the product cannot be installed, it is promised to return it before use, but KN Planning cannot ship an alternative product.
*If there is contact with the clutch side to be combined because it is not stock, it is necessary to adjust the offset with washers.
*There may be changes in product specifications due to the manufacturer's reasons.