・Exhaust Pipe Material: Titanium
・Silencer material: Titanium
・Assembly method: 4in1
[Size]
・Exhaust pipe diameter: Φ42.7
・Tail pipe outer diameter: Φ60.5
[Set components]
・Exhaust pipe per vehicle
・Assembly part
・Tailpipe
・8 springs
・Silencer
・End baffle
・Silencer band
・Silencer Bracket
[Maintenance Data]
・Drain bolt: Available
・Change oil filter: Manifold section needs to be detached
・Center stand: Not available
*Installation image and product configuration are for reference only.
*The end baffle is pre-installed on the silencer at the time of shipment.
*NITRO RACING Rearset KIT is required to install this product.
*Some types of blinkers may interfere with silencers.In this case, you will need to replace the blinkers.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
*The exhaust bracket of the vehicle shown in this page is the original one.The exhaust bracket included with the KIT is a pipework shape.
*NEVER remove the silencing baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
It is forbidden to drive on public roads with the end baffles removed.
*CB750F: In the case of using with the third party's Oil Cooler KIT, it may interfere with the fitting of the oil pan side.In this case, it is necessary to change the fitting angle to a different one and adjust it so that it does not interfere with the exhaust.
*CB900F / 1100F: This product cannot be used in conjunction with the stock oil cooler KIT, so it is necessary to change to an third party's oil cooler KIT.At this time, please make sure that the fitting parts on the oil pan side do not interfere with the exhaust.If interference is observed, it is necessary to replace the fitting with one that has a different angle and adjust it so that there is no interference.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.