[Material]
・Silencer: Titanium
・Exhaust pipe: Titanium
[exhaust pipe specs]
・UP type
・Assembly method: 4in1
・Tail pipe outer diameter: Φ60.5
・Exhaust pipe diameter: Φ38
・Exhaust surface finish: half-polished
[Components]
・Assembly part
・Tail pipe
・8 springs
・Silencer
・End baffle
・Silencer band
・Silencer Bracket
・Exhaust pipe per vehicle
[Maintenance Data]
・Drain bolt: Available
・Center stand: Not available
・Change oil filter: Manifold section needs to be detached
*The end baffle is pre-installed on the silencer at the time of shipment.
*For installation, use a stock flange.It is not included in the KIT.
*Grenade titanium silencers are mounted with a Φ90 diameter silencer band.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
*It is necessary to change to a single type rearset or cut off the pillion part of the stock step.
*Some types of blinkers may interfere with silencers.In this case, you will need to replace the blinkers.
*NEVER remove the silencing baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
*This product is not compatible with the vehicles produced after 2000, which are equipped with a catalytic converter in the exhaust.
*The short tail type silencer bracket is designed to fit the reservoir tank of OHLINS R shock.
*NITRO RACING Pillion Step Bracket KIT Type 1 cannot be installed on the short tail type.If you are already using Type 1, please replace it with the Pillion Step Bracket KIT Type 2.
*Image 1 is for reference only.Please refer to the image 2 for the silencer shape you can choose.