Мотозапчасти NGK для KAWASAKI W800

NGK иридия штепсельной вилки CR8EIX 4814

If replaced, there is an obvious change in the blowout areaIf you ride it, you will notice the difference in torque and power at the beginning of the rideI think it's a great deal if you can power up for this priceFor those who have only used the Standard Plug BP5HA, I think it's a good idea to give...

Прочитайте больше

Продукты Подробнее

NGK Мото вилка ДХ 91582

I increased the front sprocket on my beloved W800 by 1TIf you perform a little rough Accelerator operation at the time of starting and SHIFT UP Knocking symptoms now occurOriginally, I heard that the mixture of air is a little thin on the motorcycles these days to meet the exhaust gas regulationsRou...

Прочитайте больше

Продукты Подробнее

NGK Стандартный разъем CR8E 1275

It's my first plug replacement with 20,000km on the odometer now (sweat;;I didn't know that maintenance called Plug Replacement was necessary, but When I looked at NGK's site, I saw that the recommended replacement weight is 3000 to 5000 kilos, and I was creeped out I've done it..It runs fine with n...

Прочитайте больше

Продукты Подробнее

NGK Мото вилка ДХ 91582

I heard that NGK has debuted a new Plug following Windshield IRIDIUM I quickly adopted itFirst, check out the ManufacturerSitehttps://www.ngk-sparkplugs.jp/products/sparkplugs/dx/index.htmlI was so impressed with Hikaru Miyagi's video impressions that I wanted to experience it myselfIn that regardI'...

Прочитайте больше

Продукты Подробнее

NGK Стандартный разъем CR8E 1275

Eh Plug is the first time I've changed a Plug at 65,000 kmCowl out of SIDEOh, it's a hassle (lol) I should have taken Tank off tooSo When I took it off Oops The electrode is worn out badly It was done right, so, wellThe Plug hardly wears out when it is four-wheeled, though the 1KT is the same As for...

Прочитайте больше

Продукты Подробнее

NGK иридия штепсельной вилки CR8EIX 4814

[Installation and feel]The NINJA2 Helmet 50RSL has an oddly tucked-in plug position, and the plug It is hard to turn a wrench when wrench is hard to enter and it has a hard time to turn a wrench at the time of removal It is not a story not limited to this Plug, but be careful not to damage the screw...

Прочитайте больше

Продукты Подробнее

NGK иридия штепсельной вилки CR8EIX 4814

I bought these Iridium plugs because I bought them before and used them quite a bit i replaced them at the same time as the carburetor tune-up and the response is awesome The Iridium Plug is very good Incidentally, I have put NGK Iridium Plug in LITTLE CUB and it is in good shape

Прочитайте больше

Продукты Подробнее

NGK Мото вилка ДХ 91582

I've been using Windshield IRIDIUMIX for a long time, but now that a new product is available, I'm going to be able to use it Order immediatelyWhen it arrived, I replaced it immediately and test drove itCompared to the IX, you can feel the smoother accelerationGood stickiness from low rpmSmooth acce...

Прочитайте больше

Продукты Подробнее

NGK иридия штепсельной вилки CR8EIX 4814

MT-03 (2018-present) changed to PlugLMAR8A-9Check the service manual!MT-25, YZF, be careful

Прочитайте больше

Продукты Подробнее

NGK иридия штепсельной вилки CR8EIX 4814

I wanted to compare it with the CR8E and the Windshield IRIDIUM As a result, the result is a very good blow-up, except for the Windshield IRIDIUM I don't want to be! I even thoughtIf you want to buy CR8E for cheap because it's a consumable item, you'll probably buy CR8E, but Exhaust If you want to c...

Прочитайте больше

KAWASAKI W800 NGK

NGK иридия штепсельной вилки CR8EIX 4814

NGK Мото вилка ДХ 91582

NGK Стандартный разъем CR8E 1275

NGK Мото вилка ДХ 91582

NGK Стандартный разъем CR8E 1275

NGK иридия штепсельной вилки CR8EIX 4814

NGK иридия штепсельной вилки CR8EIX 4814

NGK Мото вилка ДХ 91582

NGK иридия штепсельной вилки CR8EIX 4814

NGK иридия штепсельной вилки CR8EIX 4814

Недавно просмотренные продукты


Запчасти для двигателя (3) 4.0
Зажигание (3)
Перейти в каталог