- Подходит для:
- KAWASAKI KSR-1
- KAWASAKI KSR-2
I installed it on KSR-2All of the motorcycles I've ridden on have been fitted with Rear Sets, so I'm going to use the KSR version I found it when I was looking for it and installed it with half expect...Прочитайте больше - Подходит для:
- KAWASAKI KSR-1
- KAWASAKI KSR-2
After all, the KSR110 rubs the footpegs first when it runs on the track~However, you have to turn off the Frame for Rear Sets, and if you fall over, Parts It was not eligible for purchase because it w...Прочитайте больше - Подходит для:
- KAWASAKI KSR-1
- KAWASAKI KSR-2
The OEM's Position is a breeze to drive on the open road, butI bought it because the footpegs rubbed easily the last time I ran CircuitSwing ArmMounting Bolt is removed and Bracket is tightened togeth...Прочитайте больше - Подходит для:
- KAWASAKI KSR110 (KL110CEA00001-) (Thai Model)
- KAWASAKI KSR-2 (MX80B-000001-)
- KAWASAKI KSR-1 (MX50B-000001-)
- KAWASAKI KSR110 (KL110A-A04501-)
- KAWASAKI KSR110 (JKAKL110CCDA00058-) (Thai model)
- ...и более.
I installed it to improve the flint puerile feeling of the KSR2I haven't done any detailed pre-Road adjustments yet, but it looks good from the run(Although I changed the viscosity of the fork oil at ...Прочитайте больше - Подходит для:
- KAWASAKI KSR-1
- KAWASAKI KSR-2
front color of the NSLWheel on KSR for RaceThe centering is different for each company, but this product does not require meter gearI got the most Center!Unfortunately, meter side is not with Stages, ...Прочитайте больше - Подходит для:
- KAWASAKI KSR110 (KL110CEA00001-) (Thai Model)
- KAWASAKI KSR-2 (MX80B-000001-)
- KAWASAKI KSR-1 (MX50B-000001-)
- KAWASAKI KSR110 (KL110A-A04501-)
- KAWASAKI KSR110 (JKAKL110CCDA00058-) (Thai model)
- ...и более.
It is useless unless you pull out Fork if it is on the Manual street,Quantity : Pair (for Left and Right) Loosen the Top cap and lift the Front tire and you can exchange it just by removing Handlebar....Прочитайте больше - Подходит для:
- KAWASAKI KSR-1
- KAWASAKI KSR-2
MINICourse I bought it for running.It is very good without having footpeg.Position is also easy with the knees slightly rising.In ksr, Upfootpeg is essential.Прочитайте больше - Подходит для:
- KAWASAKI KSR-1
- KAWASAKI KSR-2
This time Quantity : I bought the 2nd set, purchased items in use were torn down by falling and wanted to try Short Bar of Racing Type, so I thought about buying a single item as Repair Parts, but it ...Прочитайте больше - Подходит для:
- KAWASAKI KSR110 (KL110CEA00001-) (Thai Model)
- KAWASAKI KSR-2 (MX80B-000001-)
- KAWASAKI KSR-1 (MX50B-000001-)
- KAWASAKI KSR110 (KL110A-A04501-)
- KAWASAKI KSR110 (JKAKL110CCDA00058-) (Thai model)
- ...и более.
Thailand Since it was exchanged from Initial Adjuster made in the country, Bolt size of the head was 20 mm, ornotation Nut which was meaningless, etc...There is no problem in making, but as for the it...Прочитайте больше - Подходит для:
- KAWASAKI KSR-2
- KAWASAKI KSR-1
First of all, I'm glad to hear that the installation accuracy is OK as I thought it was OEM.However, in case of myself, for the inverted Shock of YSS, because the gap between Spring and Chain slid...Прочитайте больше - Подходит для:
- KAWASAKI KSR-1
- KAWASAKI KSR-2
[Webike Monitor] It purchased as a Step of KSR2.
Although a authentic positive one is too low, even if it is too high not much, it becomes difficult to ride.
It has just right height for it to be t...Прочитайте больше - Подходит для:
- KAWASAKI KSR-1
- KAWASAKI KSR-2
Goods arrived and it attached instantly.
The Plating has started or structure is better than the skid of the Step was also beautiful and having imagined it.
Although it has not run seriously yet, a...Прочитайте больше - Подходит для:
- KAWASAKI KSR-1
- KAWASAKI KSR-2
[Webike Monitor] The Racing type was purchased.
attaching -- simplicity -- it only substitutes that it is pure.
Although texture is also perfect, and since the Plastic stuck in the portion is somew...Прочитайте больше - Подходит для:
- KAWASAKI KSR110 (KL110A-000001-)
- KAWASAKI KSR110 (KL110A-A04501-)
- KAWASAKI KSR-1 (MX50B-000001-)
- KAWASAKI KSR-2 (MX80B-000001-)
Although used for commuting of 50 km of one way attached to KSR80, when a Puncture Tube is turned off twice, it has not put on Schopp easily, it deposits and goes home by train.
Use was stopped to co...Прочитайте больше - Подходит для:
- KAWASAKI
- KAWASAKI
A Hub damper can be attached to ksr2.
attachment was also able to be made satisfactory.
It is a satisfying thing in which the choice of the Wheel spreads.
Прочитайте больше - Подходит для:
- KAWASAKI
- KAWASAKI
Since the target was due to be made to wear the wheel of a gale speed in KSR-2 in the future [ [Webike-monitor] ], it purchased previously. A damper, a bolt, color, etc. are included and there are 844...Прочитайте больше - Подходит для:
- KAWASAKI KSR110 (KL110A-000001-)
- KAWASAKI KSR110 (KL110A-A04501-)
- KAWASAKI KSR-1 (MX50B-000001-)
- KAWASAKI KSR-2 (MX80B-000001-)
It was used by KSR-1. The wheel of KSR was heavy at TETCHIN, and rusted easily, and the weight saving exchanged it for the awkward thing for the purpose. It arrived, and when it had to tube-ize, I und...Прочитайте больше - Подходит для:
- KAWASAKI KSR-1
- KAWASAKI KSR-2
in the we race, by use, although many have fallen (smile), it is preeminent for durability and has fully taken origin!! KSR2 and KSR110 have two sets -- it is -- although -- since attachment of either...Прочитайте больше - Подходит для:
- KAWASAKI KSR110 (KL110A-000001-)
- KAWASAKI KSR110 (KL110A-A04501-)
- KAWASAKI KSR-1 (MX50B-000001-)
- KAWASAKI KSR-2 (MX80B-000001-)
Although purchased to KSR-2, to put it bluntly, it is not a recommend. ... It cannot assent to become tube specification first. Since it is the configuration of dividing a wheel into two from middle e...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА