![BRC [Распродажа Товар] Легкая муфта сцепления [Специальная Цена]](http://img-webike-370429.c.cdn77.org/catalogue/images/49820/4433_TS.jpg)
I replaced the OEMGrip because it was sagging. It's not so bad.
 |  |  |
 |  |  |
 |  |  |
It was the final model of the CB250 series, which derived from the CB72. Its frame and engine were both newly designed and its exterior parts were all renewed. It was the first HONDA model to adopt a 6-speed transmission.
| Объём двигателя | 249 | Тип двигателя | Air-cooled/4-stroke/OHC/2 Valve/Parallel 2-cylinder |
| Максимальная мощность (л.с) | 27ps(20.0 kw)/10000rpm | Максимальный крутящий момент (кгс*м) | 2kg・m(19.6N・m)/9000rpm |
| Вес мотоцикла (Сухой вес) | 172 | Емкость топливного бака литр | - |
DENSO Иридиум Рейсинг Вилка IXU01-31
Previously, other types of iridium plugs were used, but they were replaced using 10,000 km. It is more tough than the previous product, but it feels more compact.
ALCAN hands Гамма для захвата черной резины
Does what it needs to do. I mean it's cheap and holds my hands just fine like the stock waffle grips. If you have a handguard, you have to cut it though. It isn't something like a proper enduro grip with removable covers and all. But for the price, this is hard to beat. Maybe I'll get another pair i...
NTB прокладка
[How is it used?I removed the Exhaust pipe once when I painted it heat resistant, so I renewed it and made a new one.Was the one you received as per Image?It's a common one, so it's neither good nor bad.Was the installation difficult?Is there a stumbling block? I was also scrubbing Carbon, which is ...
NTB Стальной шарик для рулевого стержня
When I replaced the Stem for KMX200 in KMX125 which I bought in Yahoo!For some reason, I didn't have enough steel balls for Stem bearing, so I checked the size from Parts List and bought them.So far I have no complaints about the sphericity or hardness.If you have a Kawasaki, you can check the size ...
M&H MATSUSHIMA H4 Галогенная лампа велосипедная ба...
The OEM light valve of SEROW250 ran out of bulbs, so I installed it.I ran out after just under 60,000km, so I'm happy to replace it when it gets over 50,000km.Compared to the OEM, it's about three times brighter and a little more white-colored.It is recommended as a Halogen bulb because of the perfe...
ALCAN hands Черная резиновая рукоятка Эбсилон
Used for XELVIS.Universalism is high because of the general inner diameter.The design is not often seen, but it is thick and soft and comfortable to grip.It's also non-slip, so you won't get tired even if you hold it for a long time.If you like the design, you should buy it.
![Hirayama Industry Крышка мотоцикла Кизуна [КИЗУНА]](http://img-webike-370429.c.cdn77.org/catalogue/images/43748/kizuna_01_TS.jpg)
Hirayama Industry Крышка мотоцикла Кизуна [КИЗУНА]
I think it is a very good product. It is well made and feels secure. The bike has been protected by the bad weather for a while now.
ALCAN hands Гамма для захвата черной резины
"It got twisted during installation.The Grip itself is thin and the GripPattern feels good in the hand, but it doesn't absorb vibrations very well, and because it's thin, it seems to twist easily.I don't recommend it for people who have to hold the Grip for a long time or do the grip removal by them...
NTB Стальной шарик для рулевого стержня
This is a 1/4 size steel ball.It is used for the Stem bearing (above) of TS125RK and the Stem bearing of KLE250.The price is about 2/5 of the OEM product. 50 units for 2 units, where it costs 2,500 yen, but it only costs 1,000 yen.It's a quality product.
(4.0)
Newest activities
-
User288132 joined the group ウェビックCB250公式グループ 3 weeks, 2 days ago
-
User218745 joined the group ウェビックCB250公式グループ 1 year, 5 months ago
-
User201566 joined the group ウェビックCB250公式グループ 1 year, 9 months ago
-
User162045 joined the group ウェビックCB250公式グループ 2 years, 5 months ago
-
User152592 joined the group ウェビックCB250公式グループ 2 years, 8 months ago
Newest active members
? 
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА