- Подходит для:
- DUCATI MULTISTRADA 1000DS 1000
- DUCATI STREETFIGHTER848
- DUCATI MONSTER796
- DUCATI Multistrada 1100/S
- DUCATI MONSTER1100EVO
- ...и более.
This is Shaft, a cantilevered Roller stand.Without it, nothing is possible.If it is a compatible caliber, it will go in easily.I used it for about 4 years and it was not damaged, just rusted.Rust used...Прочитайте больше - Подходит для:
- DUCATI MULTISTRADA 1000DS 1000
- DUCATI STREETFIGHTER848
- DUCATI MONSTER796
- DUCATI Multistrada 1100/S
- DUCATI MONSTER1100EVO
- ...и более.
Although it is originally Φ 41 for panigale,In my case, with Rear slider attachedBecause I wanted to use Maintenace Stand,I chose Φ 26.(Only Babyface's Slider corresponds to this)Follow the instru...Прочитайте больше - Подходит для:
- DUCATI 848
- DUCATI 1098
- DUCATI 1198
- DUCATI 1098R (*1)
- DUCATI 1098S
- ...и более.
I wanted FSTAND to be supported by Stem, but I wanted FForkI do not want to do the removal work - - - And chose this.It was possible to Lift up even if the Tire is in the large geometry and the bottom...Прочитайте больше - Подходит для:
- DUCATI 848
- DUCATI 1098
- DUCATI 1198
- DUCATI 1098R (*1)
- DUCATI 1098S
- ...и более.
I used it in 1199S Panigale.Although it is not in the adaptation model, I purchased it by reading Impre.I will also impress for the people of the same model.Can be used without problems.I am afraid th...Прочитайте больше - Подходит для:
- DUCATI MULTISTRADA 1000DS 1000
- DUCATI STREETFIGHTER848
- DUCATI MONSTER796
- DUCATI Multistrada 1100/S
- DUCATI MONSTER1100EVO
- ...и более.
Since it was indispensable to the cantilever STAND, to it, it purchased together with the STAND.at the time of use, although there is, since there is no shake of a car body so that a fall becomes anx...Прочитайте больше - Подходит для:
- DUCATI MULTISTRADA 1000DS 1000
- DUCATI STREETFIGHTER848
- DUCATI MONSTER796
- DUCATI Multistrada 1100/S
- DUCATI MONSTER1100EVO
- ...и более.
It seems that it is satisfactory although it was shorter than anticipation and worried.
It may be hard to set to a Motorcycle if it lengthens.
Прочитайте больше - Подходит для:
- DUCATI MULTISTRADA 1000DS 1000
- DUCATI STREETFIGHTER848
- DUCATI MONSTER796
- DUCATI Multistrada 1100/S
- DUCATI MONSTER1100EVO
- ...и более.
Simultaneous purchase was carried out with the Maintenance stands of the company.
It seems that it can respond also to the Arm of other company if Shafts are exchanged although it is used for present...Прочитайте больше - Подходит для:
- DUCATI MULTISTRADA 1000DS 1000
- DUCATI STREETFIGHTER848
- DUCATI MONSTER796
- DUCATI Multistrada 1100/S
- DUCATI MONSTER1100EVO
- ...и более.
Although a cantilever Stand shaft is inserted into an Axle Shaft, I feel that it is short at worst.
It will be chilled, if a Shaft falls out when raising ? car body, if it could be long to a slight d...Прочитайте больше - Подходит для:
- DUCATI 848
- DUCATI 1098
- DUCATI 1198
- DUCATI 1098R (*1)
- DUCATI 1098S
- ...и более.
Although not indicated in an object vehicle type, MULTISTRADA 1000DS 1200 is also suited.Since it exchanged with the J Trip beforehand [ ] and you replied to it carefully, it purchased this time.Compl...Прочитайте больше - Подходит для:
- DUCATI 848
- DUCATI 1098
- DUCATI 1198
- DUCATI 1098R (*1)
- DUCATI 1098S
- ...и более.
It purchased to S4RS.
It was not in the situation stabilized using the Jack for cars until now [ ].
It is good for moral target for workability to also progress and to be able to work safely rather...Прочитайте больше - Подходит для:
- DUCATI MULTISTRADA 1000DS 1000
- DUCATI STREETFIGHTER848
- DUCATI MONSTER796
- DUCATI Multistrada 1100/S
- DUCATI MONSTER1100EVO
- ...и более.
It purchases to MONSTER1100S. (required for JT-136RD use) It is just fit and safe!Прочитайте больше - Подходит для:
- DUCATI 848
- DUCATI 1098
- DUCATI 1198
- DUCATI 1098R (*1)
- DUCATI 1098S
- ...и более.
Although he wanted the stainless up stand in fact, since there was no hole in a stainless flesh side, the goods here were purchased to 1098. Although a wheel can be removed, Faulk cannot remove. The u...Прочитайте больше - Подходит для:
- DUCATI MULTISTRADA 1000DS 1000
- DUCATI STREETFIGHTER848
- DUCATI MONSTER796
- DUCATI Multistrada 1100/S
- DUCATI MONSTER1100EVO
- ...и более.
In using cantilever stand JT-136, they are indispensable parts. Although collected into the column corresponding to a vehicle type with the grade, I correspond also to Monster S4R.Прочитайте больше - Подходит для:
- DUCATI MULTISTRADA 1000DS 1000
- DUCATI STREETFIGHTER848
- DUCATI MONSTER796
- DUCATI Multistrada 1100/S
- DUCATI MONSTER1100EVO
- ...и более.
Perfect to S2R1000! With [ it plays and ] none of most wobbles!Прочитайте больше - Подходит для:
- DUCATI MULTISTRADA 1000DS 1000
- DUCATI STREETFIGHTER848
- DUCATI MONSTER796
- DUCATI Multistrada 1100/S
- DUCATI MONSTER1100EVO
- ...и более.
It purchased to Ducati 1098. It purchased simultaneously with a stand main part. I think that attachment was also easy and did not take 1 minute. However, it is a difficulty that a shaft is still a la...Прочитайте больше
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА