SSK Прокладка крышки углеродного бака
It may be a little tricky to apply, but I'm satisfied with the look of Carbon Style.
ССК предлагает в основном наружные части, как части заготовки из алюминия, экран и так далее. Кроме того, они предлагают сухие части углерода, а также. Эти ценные части иногда трудно получить. ССК предлагает эти части по разумным ценам.
It may be a little tricky to apply, but I'm satisfied with the look of Carbon Style.
I have to find and purchase the bolts because the bolts are not suitable for 2020 s1000rr. The product description in the web never says it is the suitable for 2020 s1000rr. This is a very very bad pu...
I was able to install it without any modification, but it was a little thicker than OEM and the Rivet was very tight, but I applied Silicon grease and pushed it in.
I had more trouble removing the OEM Fender than installing it, the screw with the screw stopper got licked and I had a bad experience lol.
It was relatively affordable for a carbon fender, but it was well made and I am very happy with it, and it was installed without any modifications.
There was no modification to the Rivet, but the Rivet potch is a bit thicker than the OEM, so the Rivet potch became very hard.
There is no particular modification and it is easily put on. I think there is individual difference, but in my case, the space between Tank and Cover is too narrow, so when I kneel grip, it interferes...
OEM has a Cushion on the reverse side of photo 3. I reused it because it is only pasted with double-sided tape.
yzfr25 (19) I installed it inRear Fender itself is hard to see. Whether you are wearing it or not, the appearance of the Large is not changed. Also, there is no effect. Therefore, it depends on the fe...
It's not cool when you put up a stand, but it's pretty stable when you put up a stand, and it doesn't look good, but I'm going to change it to a different stand cover
OEMLever, it's a long time and Quantity:I bought it because I was wondering what a short Lever would do to my ring finger or something when I held it with my 2pc finger or something.I held it with thr...
The texture is goodThe 500ml plastic bottle interferes slightly with the Max widthWhen I say snug, I mean it's snug, so you won't have to worry about it falling out However, that's why it won't fit if...
Maybe it's because the OEM and Bolt materials are differentIt felt like a bite in the middleNo more torquingThere's a chance it won't come off againI gave up on it because it is thereIndividual differ...
The position of the brake lever is too far away, the closest position is about the normal position If you have a throttle assist, it may not work for you
I purchased it because I wanted to exchange OEMLever for BALIUS 2.I was looking for an inexpensive one with an Adjust lever and I arrived at this item.Color is Gold, Adjust part is Black.Installation ...
I wanted a Short lever, I thought that if it all seemed Black, I did not look closely at SilverLeverBlackBody.I thought that I had bought GarbageLever because I did not have a 6 mm hole color at the i...
Because there is a habit of hanging your finger on Lever when drivingAt the OEM position the fingertip was hard to get on LeverCome to your preferred position in 6 stepsOEM is fourth placeJust in case...
Because the garage is narrow, I tried to make Short lever to try to secure even a little passage width. Select Blue's Adjuster for Silver Lever. There was the same combination in the product photo...
The short length and adjustability is great for someone with short fingers like me, allowing me to respond better. Great look that suits the modern style of the bike.
There is no worry of cracking like resin with Aluminum Material.Although it is not difficult with regard to installation, even if you tighten Bolt considerably with Spacer rubber in it, Firmly is not ...
I bought it because I had to remove the Tandem seat and put it on the back of the seat where I put the OEM Helmet.I couldn't tell from the picture how much this product sticks out, but when I installe...
I installed it on my BMW S1000RR2020.Even a monkey can install it with in-vehicle tools.
Чтобы продолжить просмотр данной продукции на веб-сайте Webike для японского рынка (на японском языке), нажмите кнопку "Перейти к Webike в Японии".
Клиентский сервис
* Это НАИЛУЧШИЙ и ДОСТУПНЫЙ ПО ЦЕНАМ магазин для приобретения японских мотозапчастей.
* Зарегистрируйтесь сейчас и получите удивительные скидки и другие выгодные предложения!
* Более 2,000,000 разных товаров. Невозможно НЕ НАЙТИ нужные вам запчасти и экипировку.
Поздравляем! Ваш новый аккаунт создан успешно! Теперь вы можете воспользоваться особыми привилегиями для клиентов Webike и получить наиболее выгодные предложения. Если у Вас какие либо вопросы, пожалуйста, обратитесь к нам через ОБРАТНУЮ СВЯЗЬ.
Подтверждение отправлено на электронную почту, указанную Вами при регистрации аккаунта. Если письмо не получено, попробуйте связаться с нами через обратную связь.
САМЫЙ БОЛЬШОЙ
МАГАЗИН В ЯПОНИИ
РАСПРОДАЖИ,
АКЦИИ, СКИДКИ
БЫСТРАЯ
ДОСТАВКА